devn-wd.so

Driver for the SMC 8003/8013 Ethernet controller and compatibles

Syntax:

io-net -d wd [option[,option ...]] ... &

Options:

Use commas (,) to separate the options (not spaces).

iftype

Interface type (from <net/if_types.h>). The default is IFT_ETHER.

iorange=0xXXXXXXXX

The I/O base address. The 0xXXXXXXXX parameter must be a hex address (e.g. 0x320). The default is automatically detected on supported hardware.

irq=num

IRQ of the interface. The default is automatically detected on supported hardware.

lan=num

LAN number. The default is 0.

mac=XXXXXXXXXXXX

MAC address of the controller. The default is automatically detected on supported hardware.

media=num

Media type (from <hw/nicinfo.h>). The default is NIC_MEDIA_802_3.

mru=num

Maximum receive unit. The default is 1514.

nomulticast

Disables the driver from sending or receiving multicast packets. By default, multicast is enabled.

priority=N

Priority of the driver-event thread. The default is 21.

promiscuous

Enable promiscuous mode. The default is off.

uptype=name

Interface name. The default is "en".

verbose
verbose=num

Be verbose. Specify num for more verbosity (num can be 1-4, the higher the number, the more detailed the output). The default is 0. The output goes to slogger, invoke sloginfo to view.

Description:

The devn-wd.so driver controls the SMC 8003/8013 Ethernet controller and compatibles.

Examples:

Start io-net using the SMC 8003/8013 driver and the full TCP/IP stack:

io-net -d wd iorange=0x320,irq=11 -p tcpip
ifconfig en0 10.184

See also:

io-net

"Network drivers (devn-*)" and "Network protocol interfaces (npm-*)" in the Utilities Summary