Graphics driver for Silicon Motion Lynx chipset
io-graphics -dl devg-smi7xx.so [option[,option ...]] ... &
ARM (XScale), MIPS, PowerPC, x86, SH4
For the general io-graphics options that can be used with this driver, see io-graphics.
Options specific to this driver:
The devg-smi7xx.so driver provides accelerated 2D support for the specified graphics chipset.
You can edit the smi7xx.conf configuration file to enable devg-smi7xx.so to run on your board. Follow the editing instructions in this file to specify the correct configuration for the required display mode. (For a more detailed explanation of the display settings, see the appropriate Silicon Motion documentation.)
You must specify the location of the configuration file to the devg-smi7xx.so driver via the -a option of io-graphics, like this example:
io-graphics -dl devg-smi7xx.so -g640x480x16 -amode = /etc/config/smi7xx.conf
Feature | Provision |
---|---|
Solid fills | Yes |
Pattern fills | No |
Onscreen blitting | Yes |
Offscreen blitting | Yes |
Chroma-keyed blitting | Yes |
Alpha blending | No |
Raster OP's | Full |
Feature | Provision |
---|---|
YUV formats | Yes |
RGB formats | Yes |
Up scaling | Yes |
Down scaling | No |
Feature | Provision |
---|---|
Hardware Cursor | Yes |
TV Out | No |
Video capture | Yes |
DPMS (power saving) | Yes |
Layer Support | 3 layers |
Display sixe (pixels) | Refresh rate(Hz) | Color depth (bits per pixel) |
---|---|---|
640x480 | 60 | 8, 15, 16, 24 |
800x600 | 60 | 8, 15, 16, 24 |
1024x768 | 60 | 8, 15, 16, 24 |
Restrictions:
This driver needs the following files available at run time:
io-graphics, crttrap, devgt-iographics