View topic - QNX 6.5.0 crashes

QNX 6.5.0 crashes

Discussion about the QNX6 OS.

QNX 6.5.0 crashes

Postby Ifflag » Fri Jan 11, 2019 9:47 pm

Hello I have a serious problem.
QNX crashes without warning. The crashes are completely arbitrary, for example:

1 case:
I launch QNX on my PC and I start the terminal and execute the "ped" command to open a file with the QNX texteditor -> crash(QNX does not react at all, the computer mouse does not move and the system does not respond to keystrokes)

2 case: I launch QNX on my PC I start a terminal then, when I'm typing a command into the terminal or I'm writing a programm in the texteditor -> crash(same behavior as case 1)

3 case: I launch QNX on my PC and I plug an USB-Stick in the port -> crash(same behavior as case 1)

And I still have x more examples where QNX crashes. What I'm saying is with all the examples I can't narrow down the problem. I have several times reinstalled the OS but that didn't solve the problem.

processor=X86 num_cpus=2
cpu name=Pentium III Stepping 10 speed=2798
New Member
Posts: 9
Joined: Thu Apr 12, 2018 10:07 pm
Location: Belgium

Re: QNX 6.5.0 crashes

Postby maschoen » Mon Jan 14, 2019 2:27 am

I've a lot of experience with QNX and computers in general. It seems like you have unstable hardware. Here is what I would try. Turn off the power and open the case. Clean out any dust. If there is a lot of dust, you might have an overheating CPU. Check that all the fans are working. Remove memory and cards. Use a soft pencil eraser across all the contacts. Brush off or used compressed air. Reseat cards. Check again to see if the crashes continue. If they do, I would try new hardware.

QNX 6.5.0 has been in my experience very stable. The only problem I see is now and then, maybe every 6 months, Photon crashes. I'm pretty sure it is a random problem related to the video card.
QNX Master
Posts: 2703
Joined: Wed Jun 25, 2003 5:18 pm

Return to QNX6 - OS

Who is online

Users browsing this forum: No registered users and 2 guests