Debugging problems in 6.2.1a

bridged with qdn.public.devtools
Alex Chapiro

Re: Debugging problems in 6.2.1a

Post by Alex Chapiro » Tue Aug 12, 2003 5:18 pm

I don't think it is a good idea. This is the first case we run into this
problem.
Unfortunately the log you send me does not correspond the described problem.
If you installed Patch B, please remove .log, start IDE, try operation you
cannot perform, close IDE and send me .log together with snapshot of the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem I've installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I believe it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after having tried
to
debug my application.

Meanwhile I think it would be the best to reinstall Momentics version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics IDE dialog.
For target please check the date of build for /usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses version 6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I determine the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I guess before
continuing of this issue investigation it is a good time to ask you
which
version are you using on your host and on your target? Host build
version
you can find in about dialog. As far as I remember, we never shipped
6.2.1A.
This is important to know in order to look at correct code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to target using
file
system
navigator. Even larger files (10MB instead of 470kB) can be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs while
transferring
file
from
host to target. Exception message is just an errno description.
Could
you
please try to copy the same file from host to /tmp on target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the space used does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so, how much space
it
uses
currently? It can easily exhaust your target memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application trying to
debug.
I have 128MB RAM on my target and I can't debug a "hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com> schrieb im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out of memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun 17, 2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at











com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at











com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at











com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at











com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform
FileTransfer(LaunchConfigurationDelegate.java:443)
at











com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at











org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at











org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at











org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503 Jun 17, 2003
12:47:13.220
!MESSAGE Can't transfer file for etx : Open Not enough
memory
!STACK 0
java.io.IOException: Open Not enough memory
at











com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at











com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at











com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at











com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform
FileTransfer(LaunchConfigurationDelegate.java:443)
at











com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at











org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at











org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at











org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr 07, 2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at
org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at
org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at





org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at











org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at











org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at











org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at











org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at











org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at











org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at


org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at











org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at
org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at











org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at











org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at











org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at











org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at
org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at
org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at

org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at

org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at

org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at
org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at











org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at
org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at java.lang.reflect.Method.invoke(Native Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at org.eclipse.core.launcher.Main.run(Main.java:703)
at org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP PC an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C Application Project".

Regards

Rüdiger

P.S. I've heard of a patchB for Momentics 6.2.1 that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb im Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos" <Ruediger.Loos@3soft.de> wrote:
Hallo,

I have a big problem in debugging my QNX
application.
I build my apps without any error and warning.
But when I start to debug my apps, I get a "Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing: Exec
error:Launching
failed"
or
"Exception occured : Not enough memory"

Can anybody help me.

There's probably a .log file generated in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX C/C++? Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if you have
further
questions.






















Bill Caroselli

Re: Debugging problems in 6.2.1a

Post by Bill Caroselli » Tue Aug 12, 2003 5:23 pm

"Rdiger Loos <Ruediger.Loos@3soft.de> wrote:
RdL > Hallo,

RdL > I have a big problem in debugging my QNX application.
RdL > I build my apps without any error and warning.
RdL > But when I start to debug my apps, I get a "Launch Configuration Error" with
RdL > one of the following informations:
RdL > "Exception occured processing launch configuration. Reason: Failed Launching
RdL > CDI Debugger: Error initializing: Exec error:Launching failed" or
RdL > "Exception occured : Not enough memory"

I have a similar problem. I'm running 6.2.1A PE (Evaluation)

I am trying the debug the sample "Hello World" program that the IDE
creates when you select create a new "QNX C Application Project".

I built it without errors.

I created a new Launch Configuration and selected the debug version of
the executable and said to debug the program. I expected it to stop
at main().

Instead I got a pop up dialog that says: "Exception occured while
launching configuration. See log for more information. Reason: Failed
launching CDI Debugger : Not supported - this should not ever be
called."

The .metadata/.log file follows:
!SESSION Aug 12, 2003 12:21:13.478 ---------------------------------------------
java.version=1.3.0 subset
java.vendor=IBM Corporation
BootLoader constants: OS=qnx, ARCH=x86, WS=photon, NL=en_US
Command-line arguments: -os qnx -ws photon -arch x86 -data /root/workspace -install file:/usr/qde/eclipse/
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.480
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.485
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.585
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.589
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.debug.ui 4 120 Aug 12, 2003 12:24:56.454
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]: org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should not ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V
com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(Lorg/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFile;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;
org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lorg/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/debug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch;
org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog$10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

!ENTRY org.eclipse.cdt.launch 4 150 Aug 12, 2003 12:24:56.457
!MESSAGE Failed Launching CDI Debugger : Not Supported - this should not ever be called!
!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should not ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V
com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(Lorg/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFile;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;
org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lorg/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/debug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch;
org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog$10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

Bill Caroselli

Re: Debugging problems in 6.2.1a

Post by Bill Caroselli » Tue Aug 12, 2003 5:50 pm

Is this patch B available to an evaluation copy of PE?
I have to admit, for the amount of extra cost of PE over SE,
so far I am NOT impressed!


Alex Chapiro <achapiro@qnx.com> wrote:
AC > It seems to be another problem that has been fixed at the early stage of
AC > Patch B beta program.

AC > Alex Chapiro.


AC > "Bill Caroselli" <qtps@earthlink.net> wrote in message
AC > news:bhb7qd$bvn$1@inn.qnx.com...
"Rdiger Loos <Ruediger.Loos@3soft.de> wrote:
RdL > Hallo,

RdL > I have a big problem in debugging my QNX application.
RdL > I build my apps without any error and warning.
RdL > But when I start to debug my apps, I get a "Launch Configuration
AC > Error" with
RdL > one of the following informations:
RdL > "Exception occured processing launch configuration. Reason: Failed
AC > Launching
RdL > CDI Debugger: Error initializing: Exec error:Launching failed" or
RdL > "Exception occured : Not enough memory"

I have a similar problem. I'm running 6.2.1A PE (Evaluation)

I am trying the debug the sample "Hello World" program that the IDE
creates when you select create a new "QNX C Application Project".

I built it without errors.

I created a new Launch Configuration and selected the debug version of
the executable and said to debug the program. I expected it to stop
at main().

Instead I got a pop up dialog that says: "Exception occured while
launching configuration. See log for more information. Reason: Failed
launching CDI Debugger : Not supported - this should not ever be
called."

The .metadata/.log file follows:
!SESSION Aug 12, 2003
AC > 12:21:13.478 ---------------------------------------------
java.version=1.3.0 subset
java.vendor=IBM Corporation
BootLoader constants: OS=qnx, ARCH=x86, WS=photon, NL=en_US
Command-line arguments: -os qnx -ws photon -arch x86 -data
AC > /root/workspace -install file:/usr/qde/eclipse/
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.480
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.485
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.585
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.589
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.debug.ui 4 120 Aug 12, 2003 12:24:56.454
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
AC > org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should not
AC > ever be called!
Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V

AC > com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
AC > org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
AC > e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;
AC > org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
AC > g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
AC > ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V
AC > org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
AC > ;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
AC > ;
AC > org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
AC > $10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

!ENTRY org.eclipse.cdt.launch 4 150 Aug 12, 2003 12:24:56.457
!MESSAGE Failed Launching CDI Debugger : Not Supported - this should not
AC > ever be called!
!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should
AC > not ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V

AC > com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
AC > org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
AC > e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;
AC > org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
AC > g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
AC > ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V
AC > org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
AC > ;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
AC > ;
AC > org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
AC > $10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

--
Bill Caroselli -- Q-TPS Consulting
1-(626) 824-7983
qtps@earthlink.net

Alex Chapiro

Re: Debugging problems in 6.2.1a

Post by Alex Chapiro » Tue Aug 12, 2003 6:10 pm

It seems to be another problem that has been fixed at the early stage of
Patch B beta program.

Alex Chapiro.


"Bill Caroselli" <qtps@earthlink.net> wrote in message
news:bhb7qd$bvn$1@inn.qnx.com...
"Rdiger Loos <Ruediger.Loos@3soft.de> wrote:
RdL > Hallo,

RdL > I have a big problem in debugging my QNX application.
RdL > I build my apps without any error and warning.
RdL > But when I start to debug my apps, I get a "Launch Configuration
Error" with
RdL > one of the following informations:
RdL > "Exception occured processing launch configuration. Reason: Failed
Launching
RdL > CDI Debugger: Error initializing: Exec error:Launching failed" or
RdL > "Exception occured : Not enough memory"

I have a similar problem. I'm running 6.2.1A PE (Evaluation)

I am trying the debug the sample "Hello World" program that the IDE
creates when you select create a new "QNX C Application Project".

I built it without errors.

I created a new Launch Configuration and selected the debug version of
the executable and said to debug the program. I expected it to stop
at main().

Instead I got a pop up dialog that says: "Exception occured while
launching configuration. See log for more information. Reason: Failed
launching CDI Debugger : Not supported - this should not ever be
called."

The .metadata/.log file follows:
!SESSION Aug 12, 2003
12:21:13.478 ---------------------------------------------
java.version=1.3.0 subset
java.vendor=IBM Corporation
BootLoader constants: OS=qnx, ARCH=x86, WS=photon, NL=en_US
Command-line arguments: -os qnx -ws photon -arch x86 -data
/root/workspace -install file:/usr/qde/eclipse/
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.480
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.485
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.585
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.589
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.debug.ui 4 120 Aug 12, 2003 12:24:56.454
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should not
ever be called!
Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V

com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;
org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
;
org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
$10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

!ENTRY org.eclipse.cdt.launch 4 150 Aug 12, 2003 12:24:56.457
!MESSAGE Failed Launching CDI Debugger : Not Supported - this should not
ever be called!
!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should
not ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V

com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;
org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
;
org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
$10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V
org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

Rüdiger Loos

Re: Debugging problems in 6.2.1a

Post by Rüdiger Loos » Wed Aug 13, 2003 10:56 am

Ok, now I performed the following steps:
1. I deleted all debug targets
2. I closed the IDE
3. I removed my .log file
4. I started the IDE
5. I tried to debug my app as a "local application

the result was the error message box in locApp.bmp and the log file
locApp.log

The I performed the following steps:
1. I removed my .log file
2. I started the IDE
5. I created a new "launch configuration" QNX QConn (IP); the only change I
did was to specify my target
6. I pressed the debug button

the result was the error message box in qconnApp.bmp and the log file
qconnApp.log

The problem is the second "tabletest_mb" directory.
The real path is "E:\Pro\MED_ETX1\code\tabletest_mb\x86\o-g"
and NOT "E:\Pro\MED_ETX1\code\tabletest_mb\tabletest_mb\x86\o-g"
but who made a mistake and how can I correct the mistake?


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhb66r$ajt$1@inn.qnx.com...
I don't think it is a good idea. This is the first case we run into this
problem.
Unfortunately the log you send me does not correspond the described
problem.
If you installed Patch B, please remove .log, start IDE, try operation you
cannot perform, close IDE and send me .log together with snapshot of the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem I've installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I believe it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after having
tried
to
debug my application.

Meanwhile I think it would be the best to reinstall Momentics version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics IDE dialog.
For target please check the date of build for /usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses version 6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I determine the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I guess
before
continuing of this issue investigation it is a good time to ask
you
which
version are you using on your host and on your target? Host build
version
you can find in about dialog. As far as I remember, we never
shipped
6.2.1A.
This is important to know in order to look at correct code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to target using
file
system
navigator. Even larger files (10MB instead of 470kB) can be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs while
transferring
file
from
host to target. Exception message is just an errno
description.
Could
you
please try to copy the same file from host to /tmp on target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the space used does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so, how much
space
it
uses
currently? It can easily exhaust your target memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application trying to
debug.
I have 128MB RAM on my target and I can't debug a "hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com> schrieb im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out of memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun 17, 2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at












com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at












com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at












com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at












com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform
FileTransfer(LaunchConfigurationDelegate.java:443)
at












com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at












org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at












org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at












org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503 Jun 17, 2003
12:47:13.220
!MESSAGE Can't transfer file for etx : Open Not
enough
memory
!STACK 0
java.io.IOException: Open Not enough memory
at












com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at












com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at












com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at












com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform
FileTransfer(LaunchConfigurationDelegate.java:443)
at












com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at












org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at












org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at












org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr 07, 2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at
org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at
org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at






org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at












org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at












org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at












org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at












org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at












org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at












org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at


org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at












org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at
org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at












org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at












org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at












org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at












org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at

org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at
org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at

org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at

org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at

org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at
org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at












org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at
org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at java.lang.reflect.Method.invoke(Native Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at
org.eclipse.core.launcher.Main.run(Main.java:703)
at
org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP PC an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C Application
Project".

Regards

Rüdiger

P.S. I've heard of a patchB for Momentics 6.2.1 that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb im
Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos" <Ruediger.Loos@3soft.de> wrote:
Hallo,

I have a big problem in debugging my QNX
application.
I build my apps without any error and warning.
But when I start to debug my apps, I get a
"Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing: Exec
error:Launching
failed"
or
"Exception occured : Not enough memory"

Can anybody help me.

There's probably a .log file generated in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX C/C++? Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if you have
further
questions.

























begin 666 qconnApp.log
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E97AT5&AR96%D+G)U;BA-;V1A;$-O;G1E>'0N:F%V83HY."D-"@``
`
end

begin 666 locApp.jpg
M_]C_X `02D9)1@`!`0```0`!``#__@#55&AI<R!F:6QE('=A<R!C<F5A=&5D
M(&)Y#0U'<F%P:&EC(%=O<FMS:&]PF2!0<F]F97-S:6]N86P@,BXP80T-9G)O
M;2!!;&-H96UY($UI;F1W;W)K<R!);F,N#6AT=' Z+R]W=W<N;6EN9'=O<FMS
M:&]P+F-O;0T-5&AI<R!I;6%G92!M87D@:&%V92!B965N(&-R96%T960@8GD-
M82!P87)T>2!O=&AE<B!T:&%N($%L8VAE;7D@36EN9'=O<FMS($EN8RX-#55S
M92!N;R!H;V]K<__;`$,`" 8&!P8%" <'!PD)" H,% T,"PL,&1(3#Q0=&A\>
M'1H<'" D+B<@(BPC'!PH-RDL,#$T-#0?)SD].#(\+C,T,O_;`$,!"0D)# L,
M& T-&#(A'"$R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R
M,C(R,C(R,C(R,C(R,O_ `!$(`.X"!@,!(@`"$0$#$0'_Q `?```!!0$!`0$!
M`0```````````0(#! 4&!P@)"@O_Q "U$ `"`0,#`@0#!04$! ```7T!`@,`
M!!$%$B$Q008346$'(G$4,H&1H0@C0K'!%5+1\"0S8G*""0H6%Q@9&B4F)R@I
M*C0U-C<X.3I#1$5&1TA)2E-455976%E:8V1E9F=H:6IS='5V=WAY>H.$A8:'
MB(F*DI.4E9:7F)F:HJ.DI::GJ*FJLK.TM;:WN+FZPL/$Q<;'R,G*TM/4U=;7
MV-G:X>+CY.7FY^CIZO'R\_3U]O?X^?K_Q `?`0`#`0$!`0$!`0$!````````
M`0(#! 4&!P@)"@O_Q "U$0`"`0($! ,$!P4$! `!`G<``0(#$00%(3$&$D%1
M!V%Q$R(R@0@40I&AL<$)(S-2\!5B<M$*%B0TX27Q%Q@9&B8G*"DJ-38W.#DZ
M0T1%1D=(24I35%565UA96F-D969G:&EJ<W1U=G=X>7J"@X2%AH>(B8J2DY25
MEI>8F9JBHZ2EIJ>HJ:JRL[2UMK>XN;K"P\3%QL?(R<K2T]35UM?8V=KBX^3E
MYN?HZ>KR\_3U]O?X^?K_V@`,`P$``A$#$0`_`,OQ'XTN_%6J33R2.VGB3_1K
M5N$11G:2N2"^"<GGJ0#C`JC%<Q*/^/2W)]XQ6-H\1E6-!QD9)P2%`&23@$X`
MR3["M6[O-/LX-0V6]U<#3@DEU+'#N$(8A DC&10&+'.Q0Q'0L=K8^UQ6/PN6
MPC3FO1*WIU:Z_-L\&GE];&3E-222ZN]K]E9-_AIU+)OXP/\`CTMO^_0IAU*+
M_GSMO^_0JC*D\ @^UV\EJ]Q&)H8YRJR-&<@,5!)&<'KZ5OZ%X9L=4T2_U?4=
M8.G6MG(B.PM6GSNX'"G/4@=#6]#,,+6PZQ,'>+T[ZWM;2^MSEK8"M2K^P>KZ
M6V:[J]M/^&W,W^THO^?.V_[]"C^THO\`GSMO^_0I=7L]#M%A_LG7'U-V)\P-
M826X0#&.7ZY]O2LNNRG*%2/-';S37YF$Z3@[2_,T_P"THO\`GSMO^_0H_M*+
M_GSMO^_0K,HJ^5$<II_VE%_SYVW_`'Z%']I1?\^=M_WZ%9E%'*@Y33_M*+_G
MSMO^_0H_M*+_`)\[;_OT*S**.5!RFG_:47_/G;?]^A1_:47_`#YVW_?H5F44
M<J#E-/\`M*+_`)\[;_OT*/[2B_Y\[;_OT*S**.5!RFG_`&E%_P`^=M_WZ%']
MI1?\^=M_WZ%9E%'*@Y33_M*+_GSMO^_0H_M*+_GSMO\`OT*S**.5!RFG_:47
M_/G;?]^A1_:47_/G;?\`?H5F44<J#E-/^THO^?.V_P"_0H_M.+_GSMO^_0K,
MI,4<J#E-3^TXO^?.V_[]"C^TXO\`GSMO^_0K+Q1BCE0<IJ?VG%_SYVW_`'Z%
M']IQ?\^=M_WZ%9>*,4<J#E-3^TXO^?.V_P"_0H_M.+_GSMO^_0K+Q1BCE0<I
MJ?VG%_SYVW_?H4?VG%_SYVW_`'Z%9>*,4<J#E-3^TXO^?.V_[]"C^TXO^?.V
M_P"_0K+Q1BCE0<IJ?VG%_P`^=M_WZ%']IQ?\^=M_WZ%9>*,4<J#E-3^TXO\`
MGSMO^_0H_M.+_GSMO^_0K+Q1BCE0<IJ?VG%_SYVW_?H4?VG%_P`^=M_WZ%9>
M*,4<J#E-3^TXO^?.V_[]"@ZG%_SZ6W_?H5EXH-'*@Y33_M*+_GTM?^_0H_M*
M+_GTM?\`OT*R^/6CCUHY5V'RFI_:47_/I:_]^A1_:47_`#Z6O_?H5E\>M''K
M1RKL'*:G]I1?\^EK_P!^A1_:47_/I:_]^A67QZT<>M'*NP<IJ?VE%_SZ6O\`
MWZ%']I1?\^EK_P!^A67QZT<>M'*NP<IJ?VE%_P`^EK_WZ%']I1?\^EK_`-^A
M67QZT<>M'*NP<IJ?VE%_SZ6O_?H4?VE%_P`^EK_WZ%9?'K1QZT<J[!RFI_:4
M7_/I:_\`?H4?VE%_SZ6O_?H5E\>M''K1RKL'*:G]I1?\^EK_`-^A1_:47_/I
M:_\`?H5E\>M''K1RKL'*:G]I1?\`/I:_]^A1_:47_/I:_P#?H5E\>M''K1RK
ML'*:T=^LLJ11V-N\CD*JK""23T%;<GAW64)#:;IB'NKW5NI'U!?(K$\+?\CA
MHG_7_!_Z,6O4]'MX=9<6TUTL,OE?N1C[[?Y[5\_G6:U<#.$*44^:^_\`PZ/<
MRG*J6,A.=632C;;S^\X$Z!J__/AH_P#X&6W_`,<J&30-9V-LTW39& +;(;JW
M=R .<*KDG\!7:Q:%J]SK;:7Y(CD3F20CY57^]GN/3UJK=6UK9>-]-M;2[^TQ
MQWUN"^,8;S%R/>O"7%.,33=.-KVZ_P"9[KX8P;NHU)-VOT_R,#P9\6?^$9DE
MMM8-W=:88QY,<>)'A<8`"[F&$V@\9X(&`,FBO*M2Z#ZBBOH<9@,/.LY2CKY:
M'C8><HTTDSH])EDM8?,B0.YB>/:>X9"I[CG![FNJTOQ#X3TU]7T6?3KG6)-0
MU"&[NYOLC!90TNYCM"[C##M7@YWLS *%)KE=.91;)GN!5TVUM,V]@P8]=KE<
M_D:YN(^'/[5Y91G9JVE[;.Z=TF[K^M4C+ YI3PZ=&NGRW;323=W9/1M76G?3
MSN)J<TNJ:W<ZG<#_`$F\NI+K:RJ'BM]H2&.3;P'"C[O..YW;@.W\+SVEG\.O
M$,U]IPO[<7,&ZV,[0[R6`'S*"1@X/X5QZ101)MC4*.IQW/J?4UIZ9XCU?0HI
M(M*U)[-96#/MBC?<1T^^I_2NK"9,\+@%AJ;NEI;1/IHM_F88C-85\7&I9
MJ$59=^KN_FW^1H^#I[:[^)6FSV>FKIUN7(6W6X:;'[LY.Y@"<FM71O$>L:S\
M3+*UN[O_`$&WOIO(M8XU1$P'4=!DG'J3U-<]/XP\175Y:W=QK4LLUJ6,#&"$
M;"PP3@(`3CUS6=9ZC=6&H+J%M=,EZK,XGV*3N;.3@C;W/;%=,L!.JW*:5^3E
M6K>NNMVOQW,/KD8*T'NTWI;3L=AI>JWGBOXAP:9K4ZR:5#=S-#8B-%B!4-M!
MP,MT_B)[^M6M.U?5O$:^*+#Q&J/86MM-*BO B"R=2=H4@9SC/4D_+]:\_2>1
M+C[2+AQ<;S)YRG:V_.=PQC!SZ5IZIXIUW6K0V>HZS<3VA8,T`2-%;'0,54%A
M[$D<#-9U<KE[JII;)>COK)=V_D:4\PCS2<[VO?;=?R^2.E\1^)-8T;PMX7M=
M*NOLGVC3LS2I&K2,,* H+ X')/'.:\X\ML=S[GDUJWFHW6H):QW=TTL5K%Y,
M"%% C7TX`)Z=R:K8CKOP6$5"#NES-N[^;M^!QXG%.HTELDOR5RGY9]*/+/I5
MS$=&(Z[.5'-SLI^6?2CRSZ5<Q'1B.CE0<[*?EGTH\L^E7,1T8CHY4'.RGY9]
M*/+/I5S$=&(Z.5!SLI^6?2CRSZ5<Q'1B.CE0<[*?EGTH\L^E7,1T8CHY4'.R
MGL-&PU;_`'?M1\GM1RH.<J;#1L-6_D]J/D]J?*@YRIL-&PU;^3VH^3VHY4'.
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MWX73_BKM%_Z_X/\`T8M=SH.GW6LW$4-H2I4!FEZ",>M<3HMS;V.OZ;=S-B*"
MZBD<]<*K@G^5=)97.JZ4LT=G?Z>$D7RV>/5+=0Z^N&<$?B 17Q'%E"I.M2<(
M.2L[V7H?9<+XB$*-92FHR=K7?J>H7&IV>HK/X?M]3D2^\H(+G ^=AU&?7UQZ
MG%>8PZ?<Z3XQTRSNXRDJW]O]"/,7!![BJVV\4AUFTY64Y##5;8$'_OY4PNKV
MX\16.JZOJ-AY=M/%-))_:$$C;(V#854<DDXP`!U-?)3P^*K3C>E*Z?9['T]&
MIA</":C6BXM/JKW\O\ON/(-3CX'UHJSK& B8]:*_4L3%>T9\'AY-TT>F?"_P
MSH^OV5VVIV?GF)(BG[QUQDOG[I']T?E7H'_"N?"@_P"85_Y,R_\`Q5<M\%_^
M/'4/]R#^<E>I5\KG&+Q%/&U(PFTM-F^R.S"4:<J2<HI[]/-G+?\`"N?"G_0+
M/_@3+_\`%4?\*Y\*?] L_P#@3+_\574T5YGU[%?\_9?>_P#,Z/J]'^1?<CEO
M^%<^%/\`H%G_`,"9?_BJ/^%<^%/^@6?_``)E_P#BJZFBCZ]BO^?LOO?^8?5Z
M/\B^Y'+?\*Y\*?\`0+/_`($R_P#Q5'_"N?"G_0+/_@3+_P#%5U-%'U[%?\_9
M?>_\P^KT?Y%]R.6_X5SX4_Z!9_\``F7_`.*H_P"%<^%/^@6?_ F7_P"*KJ:*
M/KV*_P"?LOO?^8?5Z/\`(ON1RW_"N?"G_0+/_@3+_P#%4?\`"N?"G_0+/_@3
M+_\`%5U-%'U[%?\`/V7WO_,/J]'^1?<CEO\`A7/A3_H%G_P)E_\`BJ/^%<^%
M/^@6?_ F7_XJNIHH^O8K_G[+[W_F'U>C_(ON1RW_``KGPI_T"S_X$R__`!5'
M_"N?"G_0+/\`X$R__%5U-%'U[%?\_9?>_P#,/J]'^1?<CEO^%<^%/^@6?_ F
M7_XJC_A7/A3_`*!9_P# F7_XJNIHH^O8K_G[+[W_`)A]7H_R+[D<M_PKGPI_
MT"S_`.!,O_Q5'_"N?"G_`$"S_P"!,O\`\574T4?7L5_S]E][_P`P^KT?Y%]R
M.6_X5SX4_P"@6?\`P)E_^*H_X5SX4_Z!9_\``F7_`.*KJ:*/KV*_Y^R^]_YA
M]7H_R+[D<M_PKGPI_P! L_\`@3+_`/%4?\*Y\*?]`L_^!,O_`,574T4?7L5_
MS]E][_S#ZO1_D7W(Y;_A7/A3_H%G_P`"9?\`XJC_`(5SX4_Z!9_\"9?_`(JN
MIHH^O8K_`)^R^]_YA]7H_P`B^Y'+?\*Y\*?]`L_^!,O_`,51_P`*Y\*?] L_
M^!,O_P`574T4?7L5_P`_9?>_\P^KT?Y%]R.6_P"%<^%/^@6?_ F7_P"*H_X5
MSX4_Z!9_\"9?_BJZFBCZ]BO^?LOO?^8?5Z/\B^Y'+?\`"N?"G_0+/_@3+_\`
M%4?\*Y\*?] L_P#@3+_\574T4?7L5_S]E][_`,P^KT?Y%]R.6_X5SX4_Z!9_
M\"9?_BJ/^%<^%/\`H%G_`,"9?_BJZFBCZ]BO^?LOO?\`F'U>C_(ON1RW_"N?
M"G_0+/\`X$R__%4?\*Y\*?\`0+/_`($R_P#Q5=311]>Q7_/V7WO_`##ZO1_D
M7W(Y;_A7/A3_`*!9_P# F7_XJC_A7/A3_H%G_P`"9?\`XJNIHH^O8K_G[+[W
M_F'U>C_(ON1RW_"N?"G_`$"S_P"!,O\`\51_PKGPI_T"S_X$R_\`Q5=311]>
MQ7_/V7WO_,/J]'^1?<CEO^%<^%/^@6?_``)E_P#BJ3_A7'A/_H%'_P`"9?\`
MXJNJHH^O8K_G[+[W_F'U>E_*ON1RO_"N/"?_`$"O_)F7_P"*H_X5QX3_`.@5
M_P"3,O\`\57544?7L5_S]E][_P`P^KTOY5]R.5_X5QX3_P"@5_Y,R_\`Q5'_
M``KCPG_T"O\`R9E_^*KJJ*/KV*_Y^R^]_P"8?5Z7\J^Y'*_\*X\)_P#0*_\`
M)F7_`.*H_P"%<>$_^@5_Y,R__%5U5%'U[%?\_9?>_P#,/J]+^5?<CE?^%<>$
M_P#H%?\`DS+_`/%4?\*X\)_]`K_R9E_^*KJJ*/KV*_Y^R^]_YA]7I?RK[D<K
M_P`*X\)_] K_`,F9?_BJ/^%<>$_^@5_Y,R__`!5=511]>Q7_`#]E][_S#ZO2
M_E7W(Y7_`(5QX3_Z!7_DS+_\51_PKCPG_P! K_R9E_\`BJZJBCZ]BO\`G[+[
MW_F'U>E_*ON1RO\`PKCPG_T"O_)F7_XJC_A7'A/_`*!7_DS+_P#%5U5%'U[%
M?\_9?>_\P^KTOY5]R.5_X5QX3_Z!7_DS+_\`%4?\*X\)_P#0*_\`)F7_`.*K
MJJ*/KV*_Y^R^]_YA]7I?RK[D<K_PKCPG_P! K_R9E_\`BJ/^%<>$_P#H%?\`
MDS+_`/%5U5%'U[%?\_9?>_\`,/J]+^5?<CE?^%<>$_\`H%'_`,"9?_BJ/^%;
M^$S_`,PK_P`F9?\`XJNJHH^O8K_G[+[W_F'U>E_*ON1RO_"M_"7_`$"?_)B7
M_P"*I/\`A6WA+_H$_P#DQ+_\575T4?7L5_S]E][_`,P]A2_E7W(^9?B7IMIH
M_BNZL+"'R;:/9LCW%L9C4GDDGJ315OXO?\CY>_\`;/\`]%)17VE*3E1IRD[M
MQC^2//22;2[O\SO/@O\`\>&H?[D/\Y:]3KRSX+_\>&H?[D/\Y:]$UR^ETSP_
MJ5_"J-+:VLLR!P2I94)&<=N*^6SS_?ZGR_)';@4W2BEW?YL\^\<^/[N&^NM%
MT=UB6,>5<7:G+[N,K&0?EQRI/7.0-I7)\VOHI9;V5M0662\#;96NLM)D<88M
MSD8QSTQBIM(OI=%U"TO;98WEM75T$R!U)'J/ZC!'4$'!KV%]`T+XI6=KKUNT
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M=DJN06"L1D*1T-8VK:+K.N364^HZ7HUQ'!YBMIT]X\L#%MNV7)AY=<,`I7HQ
M(85W=#XK3J;I\0:6(9IOM:M%#:+?.ZJS`0'=AP0.?NMP.>*A?Q3HZ:C]A:YD
M\\2)$V+>0HC.%*!G"[5W;AC)&3P.0:YK_A$-;MM"%A:-ISR3Z(NF3O)*ZK&R
MA\,@"'<#YAZE<8'7I6G-X:O)(-3C$L&;J^M+A,L>%B$.X'CJ?*;'U'3M=HW\
MO^#_`)"_K\O^"3ZQXOLK*TU1+1WEO;."9AFVE,'FI&7V&0#9G Y7=GK6AI&O
M6.L^8EK*YFA5&D1X7CX;.&7<!N4X.&&0<<&L*30-;CTK5]$METYK"\^U-'<R
M3N)09@[;6381P[_>W?='W<ULVFESV_B":_=XS$]C!; `G=N1I"3TZ?./UI*U
M@?EY_I_PYG1^*7D\1ZI;%9ULM-PDB)I=Q+)(Q"G<KJ,8^<?*%)(!;.*T(_$=
ME<BU-LY_?71M62XCDAD1]C/@HR9!P <-M&#G/0'.U+PY?7=OKR0S0@ZA=0S)
M&SLJR1HD:O%(0,@/L93C/#=^E4]+\(7=G=),MKI=A$-46]^RV1/EQH+8Q$#Y
M%R=QST'7UI65OE_E_P`'[ANW]>A?L/&-D-"TN[U27RKB[M5N)%@MY)$B4XRS
M;0WEID_>8@<'G@U)X@\56^E,MM;;IKTSVZ,!;221HLDBK\[J-J':20&8=N#G
MGGCX#OX;>S \J[;^S8K&YB_M2YM(P4W<CRA^\!WME6 Z<'DUHW?AG5A+>6MD
M+$V-W>6MXTDLSB2,Q>4&0)M(((B&#N'7&.]5[O-Y7_7_`"!VOH=E1114""BB
MB@`HHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****
M`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`
M^</B]_R/E[_VS_\`1244?%[_`)'R]_[9_P#HI**^\H?P*?\`AC^2/*ZR]7^9
MWGP7_P"/#4/]R'^<M>E:C8Q:GIEW83,ZQ74+PN4(#!64@XSWYKS7X+_\>&H?
M[D/\Y:]3KYC//]_J?+\D=F";5%-=W^;/G.SL8K;78K#Q`9[)(Y0EWY:;GC]<
M#N.G(SP<@-P#Z#XA^(T>B36NC^#T@CL;%@'DV[DFQU1<]5ZY;.6/(/=MCQEX
M"A\1,;ZQ=+;4P "S<1S@<#?@$Y X##GH#D 8\HOO#NMZ;,8KK3)5.2 P9=K8
MZ[22,U\TZ=6E=4UOUZGZ/0S'+LQ4)XR=G%?"_AOW\_*[^74Z[QQJWACQ+HMI
MKEJ6MM<D;RY;95R2`!G>>.!QM?J1QC@[,;P#827?BBVG485'`1CP&P=S_EL`
M],Y'THZ7X5U35)0JV\BID!O*^9U)X&3@JH]R3P/R]B\*^&(_#MHRGRS,PV_(
M,A5ST!/)SU)[GZ9.U*E-S]K45G_6IYN:YEAJ6$^H82;FK[O9*_PI]?QTZG0T
M445U'R84444`%%%%`!1110`4444`%%%%`!1110`4444`%%%%`!1110`4444`
M%%%%`!1110`4444`%%%%`!1110`4444`%%%%`!1110`4444`%%%%`!1110`4
M444`%%%%`!1110`4444`%%%%`!1110`4444`?.'Q>_Y'R]_[9_\`HI**/B]_
MR/E[_P!L_P#T4E%?>4/X%/\`PQ_)'E+>7J_S.\^"_P#QX:A_N0_SEKU.O+/@
MO_QX:A_N0_SEKU.OF,[_`-_J?+\D=>#_`(*^?YL****\HZ@HHHH`S=>U271]
M)>\AMTN)?-BB2)Y3&I+R*@RP5L ;L]#TJE:^)'CDU*+6K:&RDL$CED>WG-Q&
M5?.T`[%;?E3\NWNN,YJSXDT@ZYHKZ>%A97FA=UF&49$E5V!&#G(4C%8-[X*F
M6QO-*TIX+?2I9$O((%=H3!.L@?8I09$;$=004.<9& &K6U_K;_@CZ&ZOB73G
ML&O(Q>R1I+Y+QI83M*CXSAH@F]>,')4#!'J*;)XITB.UMK@33RBXW>7'!:2R
MRG:<-F-5+KM/!R!@\'!KGY/"-])IP4V5FS->K/<6-SJ=Q=17:!"H6261"W!P
MP781\@^HCC\'ZA;:5;6T.GZ:9(YKF1/LVH3V)MUDD+*L;Q)DK@X*D 94'M19
M".D_X2K1C=PVPNGWR^7A_(D\M3(`45WV[49@1A6()R..13K?Q/I-WJ7V"&XD
M:?S9(<FWD"&1,[DWE=NX;2=N<X&>G-8"^%-:5)K![JTN;2\N+:ZN;R0E9P\8
MC# (%VMN,0PQ8;=QX.!G0@\.W<7V'=)!^XUBXOVPQYCD\[ ''WOWBY[<'FJM
M'^OE_P`$.G]>?_ ]#<L=1M=2ADEM)?,2.5X6.TC#HQ5AR.Q!JU56Q^W^3)_:
M'V;S?-?9]GW8\O<=F<_Q;<9[9Z5:J "BBB@`HHHH`**** "BBB@`HHHH`***
M* "BBB@`HHHH`**** "BBB@`HHHH`**** "BBB@`HHHH`**** "BBB@`HHHH
M`**** "BBB@`HHHH`**** "BBB@`HHHH`**** "BBB@#YP^+W_(^7O\`VS_]
M%)11\7O^1\O?^V?_`**2BOO*'\"G_AC^2/*ZR]7^9WGP7_X\-0_W(?YRUZG7
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ME7<K<AL`9! Y["L*'PQJ5LEO>V]M:QZA!??:?)FU2XN5F'E-$0TTBE@<-D80
M@;0.^1N^'=.N]-TR:*],!N);J>X(A8LH$DC.!D@'@-CI2=K.PNB_KO\`\ 6P
MUV.Z\,VNM2V\T:3PI*8H8WG==V. $4LW7L*=;>(=,NUA,<TBM-<?9ECE@DC<
M2[2^UD90RG:,\@<8]17.PZ#XC;PA%X?G@TV-((8D$D5](WV@(RDQN/)&U'4,
MI(+8!Z&F6?A+4;!9+FSL=(M95U)+Z"QMY62 `0>4REQ'P>6;(3GCUJK1N^W_
M``1NWYG07'BO1[8H'N)7=WF1(X;:65V:)@L@"JI)VD^G3)Z FEN?%.CVJVS-
M<R2BYA^T1_9[>2;]UQ\[;%.U>>K8'Y&LW1_#NHV>HVEW=R6I,;7[R")FZSRJ
MZXR.P4@_UJMI?A[7- 6TDL%TZYF.G0V5P)YY$5&B+%70A#N!WME2%Z#FDDNO
M];_\`3MK;^M?\C0T;Q9:WUW)8W+A+S[9<6\06&01L(W8!=Y!7?L7<5SG'.,4
MJ^--'CM;>2YN2KRVR73""&:54C;(#E@@PF5.68+CC.,BHH?#EY&+(-) ?(UB
MXOVPQYCD\[ ''WOWBY[<'FJ-KX/U"'1+NR::V,DV@QZ:I#-@2J)<D_+]WYQS
MUZ\4:%65WK_5_P#+4WKWQ/I-A?"SN)IO-W1JQCM99$0N<('=5*J22/O$=1ZU
M+K.K?V5;PF.W-S=7,H@MH P7S)"">6/10 23S@`X!/!XC51)9:G=:+;76FSR
MWVH6=RUOYY%TI4P[@L6WYTVQ[M^X8&<CBNSUW3+B_BM9[*2-+ZRG%Q!YN=C'
M:RE6QR 59AGG&<X.,$LK)_UT_P""0OZ_0HW>N:[9"UAFT6Q^UW5RL$(746,1
MRCN27\G<"-G39CYASUQ#=>++V'2IYHM*A-_:7D=G=VLUV45&<J%9'$;;E/F(
M02%X)X!&*=?VGB74#8W+6>DQS65XLZ6XO9"KKY<B',GDY!^<8&SL>>>*MYX=
MUJ32[QXUL)=3U"_@N[A7G>.*)8C&51&",6XC`R0,DDX'"T*U]?ZV_P""/33^
MN_\`P#;UK5;S38]/2ULH+FZO+D6ZI+<&)%.QW)+!&/\``1]WO4%OXIMA9W+Z
ME$]I=6MP+6>W0-.QD(#*(PB[I 58$87.,Y P</U^QU&\&EW%A%:O<6=V+AHI
MYVC1AY;H0&",>KC^'M6)>^#K^]A-_--&=5>_%Z\,-U+;Q8$7DB,2H-XPG.X#
MD]0`<!:?U\O^"&FGI_G_`, T+OQC9V]]IC(S26%W!<.Q2VE>8/&R#:(U&X$;
MGW KD;><8-:0\1:2UM+<+>*\,5FM\[JK,/(.[#C Y^XW`YXZ5@0^']8TV73;
MK3K+3S-"ETLT$^I3N-TK(P;S6C9G/R<Y`ZU!-X/U:TTE[#3I;*;[1HXTV:6X
M=HMC+OPZJJMD$R'C(Q@=:>EOZ\_^`-6Z_P!:_P"1T-WXITBRO%M9IY_,)C4M
M':RR(AD("!W52J$DCAB.H]:</$^E'5ETT33&X:8P!A:RF(R!2Q3S=NS<`#QN
M[&N-U4266IW6BVUUIL\M]J%G<M;^>1=*5,.X+%M^=-L>[?N&!G(XI;?<=?L=
M`M[K3[F.UU:YN7%O.3<QHZS$^9%M`0!I`N[)W97CFCE3V_K8GI=_UN=='XLT
M6073+=.$MHGG=VMY%5HT^^T;%<2 =RF>H]15_3]2MM4MS/:&5H@VT.\+QA^
M<KN W*<\,,@]C7$V?@6]MM*N=/986*:=-96UW+JES,6W+M!,+C9$" ,[=W3
MXKO8$,<$<9QE5 ./84-(?]?D0V.HVNI0R2VDOF)'*\+':1AT8JPY'8@UE:9K
M&KZG=3,FF6*:?%=36YF:^?S2(W*%O+\K')7IO_&M6Q^W^3)_:'V;S?-?9]GW
M8\O<=F<_Q;<9[9Z5R^D^%Y]/UN:ZE\/Z!*TE[/<#4O-/VI5=V8<>3U ;'W_Q
MJ0>S]?\`/_@&FGC309+6*Z2[F:WF=8X9!:3;97968*AV?.WRL,+D@\=2!4Y\
M4:0+R*U:>9)9-@^>UE58V<91)&*[8W.1A6(;D<<BJ-GX=N[?1_#%H\D!DTJ1
M'G(8X8"%T.WCGEAUQQFJ][X;U.:^O[>%K/\`LS4+V"]EF=B)HBGEY14VE6SY
M2X8L"-QX.!F[1O;^OZW"7E_6_P#P#=L==T_4KR>ULY999(&=)6$$@1&1MK*7
M*[=P/\.<XYQCFJ]SXFT^QGN8[R4)Y5RML@B221WD:(2!=H3[Q&<!=V>.<G%3
M:'ITVF6EQ%,R,TMY<3C821MDE9P.1UP1FLR3P[=MK[7XD@\HZHEYC<=VP6OD
MD=.N[GTQW[5*M?\`KR'IK\[?H.U+QC96>EG4+<&YC^R7%PL>V1)&,)4%=NPE
M<$X;=@KZ'G%B#Q/:3B23RKD1I;1W!C%I.9P&=E_U7E[L94X(R3R<`8)QYO!U
M[/'<1M<6Z+-%J<>X%B1]ID#(<8[ '/Z9I;WPWK6I0W,DQLH)YK.VMW@CN':.
M3RI79D9]@(1T8*3@GDC!'5Z6_KS_`. -I6^_\U^ES3D\313R:9_9^62XOS:3
MK<02121_NGDP48*RGY5/(Z'W!IH\9:7%96=Q=&Y1;I(V62"RN)8<N0% D$8'
M)('.#R.!69I?A"[L[I)EM=+L(AJBWOV6R)\N-!;&(@?(N3N.>@Z^M,L_#_B*
MR;18FMM+O;72[5$CC>]DB GQAI,>2V[ X7D8RQZD8=E^7Y:DO:Z[?J_^`;;>
M+-,MU N96\UY9XXX[:&:=G\I]K854SD9&0`0.<$@9IU[XMT6PMX9YKF5XI;?
M[4K6]M+/B+KO;RU.U?=L=_0U3TSP[>6>KP7<DD!CCDOV(5B3B>973MV"G/OT
MS7):K9S^&M(FTS[9I3WM[H:6+6\MPR2NZ"15\A=F92Q<C;\I! ]:22=N_P#P
M_P#P"K*[[?\`!_R/28M3LY]0>PCFW720I.R;2,1L2%.<8Y*GCKQ6;>ZQJHUZ
M32],TVSN#%;1W#R7-ZT/WV=0`%B?/W#Z=:OVBZ@ET%E%L+%;>,(!N\WS>=V>
MVW&W&.<YKGM>\,S:AXE;4CH6AZO"UI' J:E(5,3*[L2O[F08(8>G2EI<E:I_
M+]/^";?_``D&G(3'-/LN$N$M7A$;EO-89 4;06&,G<!C`)Z X;:>)=(O9IHH
M;HCRD:0O+$\<;(IPS([ *Z@XR5) R/45E3^'M2FUN/6E^Q17$6VW2V5CY?V?
M!#'?LR) 6)7C``V\;F-9>G^ 9X]/ETN[QY*V,ME#>_VG<SN58!01`^$CX )"
MD],#`HT_K^OZVZ OZ_K^N_4Z[2M<L=:1VLFN"%56_?6LL.Y6SM9=ZC<#@\C(
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MSY2X8L"-QX.!FK1O;^OZW'+R_K?_`(!J_P#"5:/MOG%S*8[!96N91;2E(O+.
M'!;;C<,?=SDCD CFI[?5EN=;ET](_D2TBNEFW?>#LXQC''W,_C5:PT[4=,T7
M4(K9K5KZ6XN9[?S"QCS)(SH'P,XY&<>^*KW%GKUOXB?4[*UTVY6:RBMY%FO'
M@*NC.Q(Q$^0=_MTJ58;MK;^M5^AH)K]@^I_V<?M45P69$\ZSFB21E!)"2,H5
MC@$\$Y )' IK>)=(6RAO&N\036LEY&_EOS"@!9L8SP&''7GI7.0>#[Y?$=OJ
M$UMIDCPZA)=/J1=FNI8V60+$1L^4+O4`;B,(.!47_"(ZW)IL>GR-IZ0VNE76
MG0.LSLTAD"!'8;!M^YR!NQV)II*W]=O^&&K<UGL=)%XJT:6TN[H73)#:())6
ME@DC^1L[64,H+JV#@KD-VS6?<^-;.'4[) MP+2:.<RJ]A.)PZ>40!'MWXQ(2
M?E/ ST!INK>%[R_N;B>*:W5_LMH(`Y;!E@E:4!\#[ARHR.>O'K<@L-7NM<LM
M3U&*Q@^SPW$1BMYWEX?RBIW,BYY1L\#&1UYHTZ>?Y$KS_K0DD\4Z7"&GDNX1
M9"V@N%F4NQ*RN40X"XP2!SDGKD #)>/%&DG3WO?.G$:3"W,;6DHF\P@$+Y17
M?G!!QMZ<]*YZW\&:C%86\#36N^.SL("0S8W03F1S]WH0>/?KBG:[8/I&H2:]
M+>Z=!C4TN(!>SF&)@;;R2KR;3L/WB#@]`.]-J-]_ZNAM;V_K3_,ZFQU>SU'3
M6O[5IG@0NK!H)$<,A(8;&4-D$$8QFL#0_&(N]%CU34$NS'=$M#';:-=$Q+@'
M#$!M_!'S@*IYQT-6_!?G/X?>>8)FYO+F=&C)*,KS.RLI/52""#W!![UE2>$;
MXZ3H%I-;Z;J<>GVI@GLKR1A SD*!*/D;<5PP`*CASR*EJS8M#4U/Q0L$.ZP>
MVGRMG*C$LVZ.>81YP !C&2#N)SU&.M^/Q#IDNJG34G<W`<Q@^0XC9P,E!)MV
M%@,DJ#D8/'!KF;;P7J,&G6ULTUIOBL]/MSM9L;H)S(^/EZ$'CWZXZU+8^#KB
MSUHM(@GLQ=RW4<[ZI<[D,A9L"V_U607(W9Z<XS5-);>?Z#>W]=O\S3M_%4%_
MXFM--L=\EO)!/)),]M*BL49 /+=@%<?,V2N[MSZ]%7):#H&L6-[HZWGV$6NE
M64EG&\,SL\P/EA7*E %XCY&6Y/4UUM)VTM_6HCYP^+W_`"/E[_VS_P#1244?
M%[_D?+W_`+9_^BDHK[JA_ I_X8_DCREO+U?YG>?!?_CPU#_<A_G+7J=>6?!?
M_CPU#_<A_G+7J=?,9W_O]3Y?DCKP?\%?/\V%%%%>4=04444`%%%%`!1110`4
M444`%%%%`!1110`4444`%%%%`!1110`4444`%%%%`!1110`4444`%%%%`!11
M10`4444`%%%%`!1110`4444`%%%%`!1110`4444`%%%%`!1110`4444`%%%%
M`!1110`4444`%%%%`!1110!\X?%[_D?+W_MG_P"BDHH^+W_(^7O_`&S_`/12
M45]Y0_@4_P##'\D>4MY>K_,[SX+_`/'AJ'^Y#_.6O4Z\L^"__'AJ'^Y#_.6O
M4Z^8SO\`W^I\OR1UX/\`@KY_FPHHHKRCJ"BBB@`HHHH`****`"BBB@`HHHH`
M****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`H
MHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BB
MB@`HHHH`****`/G#XO?\CY>_]L__`$4E%'Q>_P"1\O?^V?\`Z*2BOO*'\"G_
M`(8_DCREO+U?YG>?!?\`X\-0_P!R'^<M>IUY9\%_^/#4/]R'^<M>IU\QG?\`
MO]3Y?DCKP?\`!7S_`#84445Y1U!1110`4444`%%%% !1110`4444`%%%% !1
M110`4444`%%%% !1110`4444`%%%% !1110`4444`%%%% !1110`4444`%%%
M% !1110`4444`%%%% !1110`4444`%%%% !1110`4444`%%%% !1110`4444
M`%%%% 'SA\7O^1\O?^V?_HI**/B]_P`CY>_]L_\`T4E%?>4/X%/_``Q_)'E+
M>7J_S.\^"_\`QX:A_N0_SEKU.O+/@O\`\>&H?[D/\Y:]3KYC._\`?ZGR_)'7
M@_X*^?YL****\HZ@HHHH`**** "BBB@`HHHH`**** "BBB@`HHHH`**** "B
MBB@`HHHH`**** "BBB@`HHHH`**** "BBB@`HHHH`**** "BBB@`HHHH`***
M* "BBB@`HHHH`**** "BBB@`HHHH`**** "BBB@`HHHH`**** "BBB@#YP^+
MW_(^7O\`VS_]%)11\7O^1\O?^V?_`**2BOO*'\"G_AC^2/*6\O5_F=Y\%_\`
MCPU#_<A_G+7J=>6?!?\`X\-0_P!R'^<M>IU\QG?^_P!3Y?DCKP?\%?/\V%%%
M%>4=04444 %%%% !1110`4444 %%%% !1110`4444 %%%% !1110`4444 %%
M%% !1110`4444 %%%% !1110`4444 %%%% !1110`4444 %%%% !1110`444
M4 %%%% !1110`4444 %%%% !1110`4444 %%%% !1110!\X?%[_D?+W_`+9_
M^BDHH^+W_(^7O_;/_P!%)17WE#^!3_PQ_)'E+>7J_P`SO/@O_P`>&H?[D/\`
M.6O4Z\L^"_\`QX:A_N0_SEKU.OF,[_W^I\OR1UX/^"OG^;"BBBO*.H**** "
MBBB@`HHHH **** "BBB@`HHHH **** "BBB@`HHHH **** "BBB@`HHHH **
M** "BBB@`HHHH **** "BBB@`HHHH **** "BBB@`HHHH **** "BBB@`KD=
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M-V/W`SC,N.F=B=-YV">%-+.SS/!/A5<[=^V%#C[F['[@9QF7'3.Q.F\[.F1!
M'&J DA0`-S$G\2>33JGF8K'+IX4TL[/,\$^%5SMW[84./N;L?N!G&9<=,[$Z
M;SL$\*:6=GF>"?"JYV[]L*''W-V/W SC,N.F=B=-YV=111S,+'F'B72=-M+C
M0GA\.Z1IMS'K=DK/96JJ2=\).'\M"1EV'&0<<X.57T^O//&*;-2L&\O;O\16
M;9V;=W-L,YV+NZ8SE^F-PQL7T.A@?.'Q>_Y'R]_[9_\`HI**/B]_R/E[_P!L
M_P#T4E%?=T/X%/\`PQ_)'EK>7J_S.\^"_P#QX:A_N0_SEKU.O+/@O_QX:A_N
M0_SEKU.OF,[_`-_J?+\D=>#_`(*^?YL****\HZ@HHHH`****`"BBB@`HHHH`
M****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****`"BBB@`H
MHHH`****`"BBB@`HHHH`****`"BBB@`HHHH`****`"N7OG\K6/%<GF>7MT.T
M;?OV;<-><[MZ8^N],?WEZCJ*YC6O#NLWFMRZAI/B!--6:VB@EC:S,I;RVE93
MN$BX_P!:W'M30C9?6])BW^9J=DFS=OW7"#;MW[L\\8\J7/IY;_W3@?6])BW^
M9J=DFS=OW7"#;MW[L\\8\J7/IY;_`-TXYG_A&/&'_0ZQ?^"UO_CU'_",>,/^
MAUB_\%K?_'J-`.F?6])BW^9J=DFS=OW7"#;MW[L\\8\J7/IY;_W3@?6])BW^
M9J=DFS=OW7"#;MW[L\\8\J7/IY;_`-TXYG_A&/&'_0ZQ?^"UO_CU'_",>,/^
MAUB_\%K?_'J-`-#5+7PKJ%S+<7U[;K)L,<_EZ@T(D1?,RLH1P' \N;AL@;)/
M1JDO$\+3K=K=W&GA9;;[+.IN0H$49E.W&?EVE)N1@CRVY^7C+_X1CQA_T.L7
M_@M;_P"/4?\`",>,/^AUB_\`!:W_`,>H&=$NK:/9P^4=4M56!2I,MT&*A=^=
MQ8YR/*ER3S^[?/W3B1];TF+?YFIV2;-V_=<(-NW?NSSQCRI<^GEO_=..9_X1
MCQA_T.L7_@M;_P"/4?\`",>,/^AUB_\`!:W_`,>H$=,^MZ3%O\S4[)-F[?NN
M$&W;OW9YXQY4N?3RW_NG`^MZ3%O\S4[)-F[?NN$&W;OW9YXQY4N?3RW_`+IQ
MS/\`PC'C#_H=8O\`P6M_\>H_X1CQA_T.L7_@M;_X]1H!F^+'BEO[&6$HR-XD
MM070##,KVZ-R$7)!4J>7P5(W#&Q/1JX63P3K]Y=V$FI>*8;J&TNX;GRQIY4D
MQNKX#&4XSMQT-=U0P/G#XO?\CY>_]L__`$4E%'Q>_P"1\O?^V?\`Z*2BONZ'
M\"G_`(8_DCRUO+U?YG>?!?\`X\-0_P!R'^<M>IU\N:'X[U7PY;O%IDGD[P!(
M=JMNQG'W@<?>/YUJ_P#"W_%7_/\`?^08O_B:\S,<JJXG%3K0DK.V]^R78TH5
MU3IJ#B^O;OZGT=17SA_PM_Q5_P`__P#Y`B_^)H_X6]XK_P"?_P#\@1?_`!-<
M7]@5_P">/X__`")K]<C_`"O\/\SZ/HKYP_X6]XK_`.?_`/\`($7_`,31_P`+
M>\5_\_\`_P"0(O\`XFC^P*_\\?\`R;_Y$/KD?Y7^'^9]'T5\X?\`"WO%?_/_
M`/\`D"+_`.)H_P"%O>*_^?\`_P#($7_Q-']@5_YX_P#DW_R(?7(_RO\`#_,^
MCZ*^</\`A;WBO_G_`/\`R!%_\31_PM[Q7_S_`/\`Y B_^(H_L"O_`#Q_\F_^
M1']<C_*_P_S/H^BOG#_A;WBO_G__`/($7_Q%'_"WO%?_`#__`/D"+_XBC^P*
M_P#/'_R;_P"1#ZW'^5_A_F?1]%?.'_"WO%?_`#__`/D"+_XFC_A;WBO_`)__
M`/R!%_\`$T?V!7_GC_Y-_P#(A]<C_*_P_P`SZ/HKYP_X6]XK_P"?_P#\@1?_
M`!%'_"WO%?\`S_\`_D"+_P")H_L"O_/'_P`F_P#D0^N1_E?X?YGT?17SA_PM
M[Q7_`,__`/Y B_\`B:/^%O>*_P#G_P#_`"!%_P#$4?V!7_GC_P"3?_(B^N1_
ME?X?YGT?17SA_P`+>\5_\_\`_P"0(O\`XBC_`(6]XK_Y_P#_`,@1?_$4?V!7
M_GC_`.3?_(A]<C_*_P`/\SZ/HKYP_P"%O>*_^?\`_P#($7_Q-'_"WO%?_/\`
M_P#D"+_XFC^P*_\`/'_R;_Y$/KD?Y7^'^9]'T5\X?\+>\5_\_P#_`.0(O_B*
M/^%O>*_^?_\`\@1?_$4?V!7_`)X_^3?_`"(_KD?Y7^'^9]'T5\X?\+>\5_\`
M/_\`^0(O_B*/^%O>*_\`G_\`_($7_P`31_8%?^>/_DW_`,B+ZY'^5_A_F?1]
M%?.'_"WO%?\`S_\`_D"+_P")H_X6]XK_`.?_`/\`($7_`,11_8%?^>/_`)-_
M\B'UR/\`*_P_S/H^BOG#_A;WBO\`Y_\`_P`@1?\`Q%'_``M[Q7_S_P#_`) B
M_P#B*/[ K_SQ_P#)O_D1_6X_RO\`#_,^CZ*^</\`A;WBO_G_`/\`R!%_\11_
MPM[Q7_S_`/\`Y B_^)H_L"O_`#Q_\F_^1#ZY'^5_A_F?1]%?.'_"WO%?_/\`
M_P#D"+_XFC_A;WBO_G__`/($7_Q-']@5_P">/_DW_P`B+ZY'^5_A_F?1]%?.
M'_"WO%?_`#__`/D"+_XFC_A;WBO_`)__`/R!%_\`$T?V!7_GC_Y-_P#(C^N1
M_E?X?YGT?17SA_PM[Q7_`,__`/Y B_\`B:/^%O>*_P#G_P#_`"!%_P#$T?V!
M7_GC_P"3?_(B^N1_E?X?YGT?17SA_P`+>\5_\_\`_P"0(O\`XFC_`(6]XK_Y
M_P#_`,@1?_$T?V!7_GC_`.3?_(A]<C_*_P`/\SZ/HKYP_P"%O>*_^?\`_P#(
M$7_Q-'_"WO%?_/\`_P#D"+_XFC^P*_\`/'_R;_Y$/KD?Y7^'^9]'T5\X?\+>
M\5_\_P#_`.0(O_B:/^%O>*_^?_\`\@1?_$T?V!7_`)X_^3?_`"(?7(_RO\/\
MSZ/HKYP_X6]XK_Y__P#R!%_\31_PM[Q7_P`__P#Y`B_^)H_L"O\`SQ_\F_\`
MD0^N1_E?X?YGT?17SA_PM[Q7_P`__P#Y`B_^)H_X6]XK_P"?_P#\@1?_`!-'
M]@5_YX_^3?\`R(?7(_RO\/\`,^CZ*^</^%O>*_\`G_\`_($7_P`31_PM[Q7_
M`,__`/Y B_\`B:/[`K_SQ_\`)O\`Y$/KD?Y7^'^9]'T5\X?\+>\5_P#/_P#^
M0(O_`(FC_A;WBO\`Y_\`_P`@1?\`Q-']@5_YX_\`DW_R(?7(_P`K_#_,^CZ*
M^</^%O>*_P#G_P#_`"!%_P#$T?\`"WO%?_/_`/\`D"+_`.)H_L"O_/'_`,F_
M^1#ZY'^5_A_F?1]%?.'_``M[Q7_S_P#_`) B_P#B:/\`A;WBO_G_`/\`R!%_
M\11_8%?^>/\`Y-_\B/ZY'^5_A_F?1]%?.'_"WO%?_/\`_P#D"+_XFC_A;WBO
M_G__`/($7_Q-']@5_P">/_DW_P`B+ZY'^5_A_F?1]%?.'_"WO%?_`#__`/D"
M+_XFC_A;WBO_`)__`/R!%_\`$T?V!7_GC_Y-_P#(A]<C_*_P_P`SZ/HKYP_X
M6]XK_P"?_P#\@1?_`!-'_"WO%?\`S_\`_D"+_P")H_L"O_/'_P`F_P#D0^N1
M_E?X?YGT?17SA_PM[Q7_`,__`/Y B_\`B:/^%O>*_P#G_P#_`"!%_P#$T?V!
M7_GC_P"3?_(A]<C_`"O\/\P^+W_(^7O_`&S_`/1245RNO:[=^(=0>^OGWW#X
W/M S@`#@ #H!17T<(<E.,'T27W)(YEK=]V_S/_9
`

end

begin 666 locApp.log
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I34534T%'12!632!T>7!E(&5L96UE;G0@=VET:"!U;FMN;W=N(&ED#0H`
`
end

begin 666 qconnApp.jpg
M_]C_X `02D9)1@`!`0```0`!``#__@#55&AI<R!F:6QE('=A<R!C<F5A=&5D
M(&)Y#0U'<F%P:&EC(%=O<FMS:&]PF2!0<F]F97-S:6]N86P@,BXP80T-9G)O
M;2!!;&-H96UY($UI;F1W;W)K<R!);F,N#6AT=' Z+R]W=W<N;6EN9'=O<FMS
M:&]P+F-O;0T-5&AI<R!I;6%G92!M87D@:&%V92!B965N(&-R96%T960@8GD-
M82!P87)T>2!O=&AE<B!T:&%N($%L8VAE;7D@36EN9'=O<FMS($EN8RX-#55S
M92!N;R!H;V]K<__;`$,`" 8&!P8%" <'!PD)" H,% T,"PL,&1(3#Q0=&A\>
M'1H<'" D+B<@(BPC'!PH-RDL,#$T-#0?)SD].#(\+C,T,O_;`$,!"0D)# L,
M& T-&#(A'"$R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R
M,C(R,C(R,C(R,C(R,O_ `!$(`1X"!@,!(@`"$0$#$0'_Q `?```!!0$!`0$!
M`0```````````0(#! 4&!P@)"@O_Q "U$ `"`0,#`@0#!04$! ```7T!`@,`
M!!$%$B$Q008346$'(G$4,H&1H0@C0K'!%5+1\"0S8G*""0H6%Q@9&B4F)R@I
M*C0U-C<X.3I#1$5&1TA)2E-455976%E:8V1E9F=H:6IS='5V=WAY>H.$A8:'
MB(F*DI.4E9:7F)F:HJ.DI::GJ*FJLK.TM;:WN+FZPL/$Q<;'R,G*TM/4U=;7
MV-G:X>+CY.7FY^CIZO'R\_3U]O?X^?K_Q `?`0`#`0$!`0$!`0$!````````
M`0(#! 4&!P@)"@O_Q "U$0`"`0($! ,$!P4$! `!`G<``0(#$00%(3$&$D%1
M!V%Q$R(R@0@40I&AL<$)(S-2\!5B<M$*%B0TX27Q%Q@9&B8G*"DJ-38W.#DZ
M0T1%1D=(24I35%565UA96F-D969G:&EJ<W1U=G=X>7J"@X2%AH>(B8J2DY25
MEI>8F9JBHZ2EIJ>HJ:JRL[2UMK>XN;K"P\3%QL?(R<K2T]35UM?8V=KBX^3E
MYN?HZ>KR\_3U]O?X^?K_V@`,`P$``A$#$0`_`,?7?%USXEU&6:1W:Q$G^CV[
M<*JC.TE<D;\$Y//4X.,"JL5S$H_X]+<GWC%8VCQ&58T'&1DG!(4`9). 3@#)
M/L*U;N\T^S@U#9;W5P-."274L<.X0AB$"2,9% 8L<[%#$="QVMC[7$X["Y;"
M-.2]$K>G5K=_-L\&GE]?&3E44DDNKO:_963?X:=2R;^,#_CTMO\`OT*8=2B_
MY\[;_OT*HRI/`(/M=O):O<1B:&.<JLC1G(#%021G!Z^E:UEX?%YX5U37#=%/
ML#QIY(CSYF]@/O9&,9]#71AL=AL106(IOW6[?.]K:7ZG+6P%:C6]@]7TMLUW
M5[?UIN5O[2B_Y\[;_OT*/[2B_P"?.V_[]"LRBN[E1R\II_VE%_SYVW_?H4?V
ME%_SYVW_`'Z%9E%'*@Y33_M*+_GSMO\`OT*/[2B_Y\[;_OT*S**.5!RFG_:4
M7_/G;?\`?H4?VE%_SYVW_?H5-XGT#_A&]66P^T_:"8$F+^7LQNSQC)].M8U1
M3E"I%3AJF5.DX/EEN:?]I1?\^=M_WZ%']I1?\^=M_P!^A6CIWA6!M%36=<U>
M+2=/F8I;LT+323,#@[8UY(Z\^W3'-9^O:1%HU_'!!?PWT$T*SQ31`C<C9QE3
M]T\'BLXXBC*HZ<7JO7[K[7\BWAYJ'.UI_7X"?VE%_P`^=M_WZ%']I1?\^=M_
MWZ%9E%;\J,N4T_[2B_Y\[;_OT*/[2B_Y\[;_`+]"K/A_P_%J\%]>7FH)I^G6
M*!Y[EHS(06.%`4<DDU'/IFDKH]W?V^NQ2/%=>1;VTD/ERW"<?O I.0.O;H.<
M=*P>(HJ;IO=6Z/KMKL;1PU24>=;>O;<B_M*+_GSMO^_0H_M*+_GSMO\`OT*S
MHHI)I5BBC:21CA549)/L*;6]D8\II_VE%_SYVW_?H4?VE%_SYVW_`'Z%9E%'
M*@Y33_M*+_GSMO\`OT*/[3B_Y\[;_OT*S I8@#J>*T-9T:ZT+4C87IC%PJ([
MA&R%W '!/J,]LBI;@I*+W92IMIM;(?\`VG%_SYVW_?H4?VG%_P`^=M_WZ%-U
MW3K+2]3-I8ZK!J<8C5FG@ VACU7@GD?7O6;BE3E"I%2CLPG3<'RR-3^TXO\`
MGSMO^_0H_M.+_GSMO^_0K+Q1BKY43RFI_:<7_/G;?]^A1_:<7_/G;?\`?H5M
M_P#")Z+::'IFHZOXF:Q.H1L\<2Z=)-T.#RA/J.H'6N;U*&P@OGBTV_:^ME Q
M.UNT&XXY^5N>.E<]/$4:LG&'2_1VT\[6-I8:<8J<MGYEG^TXO^?.V_[]"C^T
MXO\`GSMO^_0K+Q1BNCE1CRFI_:<7_/G;?]^A1_:<7_/G;?\`?H5EXHQ1RH.4
MU/[3B_Y\[;_OT*/[3B_Y\[;_`+]"LO%&*.5!RFI_:<7_`#YVW_?H4?VG%_SY
MVW_?H5EXHQ1RH.4U/[3B_P"?.V_[]"C^TXO^?.V_[]"LO%&*.5!RFI_:<7_/
MG;?]^A0=3B_Y]+;_`+]"LO%!HY4'*:?]I1?\^EK_`-^A1_:47_/I:_\`?H5E
M\>M''K1RKL/E-3^THO\`GTM?^_0H_M*+_GTM?^_0K+X]:./6CE78.4U/[2B_
MY]+7_OT*/[2B_P"?2U_[]"LOCUHX]:.5=@Y34_M*+_GTM?\`OT*/[2B_Y]+7
M_OT*R^/6CCUHY5V#E-3^THO^?2U_[]"C^THO^?2U_P"_0K+X]:./6CE78.4U
M/[2B_P"?2U_[]"C^THO^?2U_[]"LOCUHX]:.5=@Y34_M*+_GTM?^_0H_M*+_
M`)]+7_OT*R^/6CCUHY5V#E-3^THO^?2U_P"_0H_M*+_GTM?^_0K+X]:./6CE
M78.4U/[2B_Y]+7_OT*/[2B_Y]+7_`+]"LOCUHX]:.5=@Y35744=PJV5NS,<`
M"(')K;;P]K &6TS34)_ADN;=&'U!<$'V-8OA;_D<-$_Z_P"#_P!&+7J>CV\.
MLN+::Z6&7ROW(Q]]O\]J^?SK-:N!G"%**;E??_AT>WE.54L9"=2K)I1MMY_>
M<"= U?\`Y\-'_P# RV_^.56N=$U:&!Y/[.TYPBEBL%S!(Y ZX57+'UX%=Q%H
M6KW.MMI?DB.1.9)"/E5?[V>X]/6JEU:VMGXWTZTM+O[5%'?6X+XZ-YBY7T->
M$N*<8FG*G&U[=?\`,]Y\,8-IJ-23=K]_T,'P9\6?^$9DEMM8-W=:88QY,<>)
M'A<8`"[F&$V@\9X(& ,FBO*M2Z#ZBBOH<9@,/.LY2CKY:'C8><HTTDSH])ED
MM8?,B0.YB>/:>X9"I[CG![FNJTOQ#X3TU]7T6?3KG6)-0U"&[NYOLC!90TNY
MCM"[C##M7@YWLS *%)KE=.91;)GN!5TVUM,V]@P8]=KE<_D:YN(^'/[5Y91G
M9JVE[;.Z=TF[K^M4C+ YI3PZ=&NGRW;323=W9/1M76G?3SN)J<TNJ:W<ZG<#
M_2;RZDNMK*H>*WVA(8Y-O <*/N\X[G=N`Z[1E/\`PJKQ.,?\O%M_Z,6N82*"
M)-L:A1U..Y]3ZFM/3/$>KZ%%)%I6I/9K*P9]L4;[B.GWU/Z5UX/)WA,"L/3L
MVFGV6EM/N21AB,UA7Q<:EFH15EWZN[^;?H1>#])N=5\56%M;7/V64/YJS[ V
MS8-V<'@].E=MXAU&T\1_#[4[M)M3NWL;N-(KC48($;EE4A/+5>"""<C/2N1N
M/%FOWE]:7EUK4\L]H2T#>7&FPG&3\BC.<8YR,9]:6^\7>(M2M9K6]UR>>"8*
MLD;0P@$`YQP@QSW'/ YK?$83$UJT*MDN6W7;776VMUZ6\S*AB:%*,HMMW\O*
MW?YW.OU2*63XR:(51V7R(&& 2, -D_2HWU6]TCPMXJOK"58[Q=?=8YFC5S'E
ML$J&!&=N1TZ$US,/C;Q+;6T-M;Z[/%!"%5(Q%$V .@W,A8C\>G'2LV35K^:Q
MGLY+YVM[FX-U.AC0>;(3G<2%R.>PP*Q665GRQG;E5EONE*[Z=NAHL?22<E>[
M\MO=:_,]`%E:^(M=\%7NK1QRS7MM*UR2BKY[Q@;=P `.?3&.W2N2U_Q1XGU%
M=2TR](6R63FU^RH!:JKC: 0N1V7)/?WK,EU:^G6Q1[Z398*5M50*ABR020R@
M-G('))JWJ?BO7]8LS9W^M3S6C,&:'RXT#8.0"54,1G'4]N:UIY?4A4C*24DK
MVU^'WFTUIVLNFQF\;"4&KM-I7=M]+-'H=_XAU2#XE:9HL<T8TN>")9[<PH1+
MN5@2S$;NF.A X[UY/K5LEOKVI00IMBBNY8T4=E#D`?I5Z37=2EUB/5I;]GOH
M@HBE,:#8%Z `+@XSW!JC+(UQ-)//*99I7:21V !9F)).!@=3V%:X' 2P\DW;
MX;.W5WW^XSQ.,C5@TNZMZ6U_$ZOQK;2WGACPKJ%JCR6,-CY#,HRL<@V@@^A)
M&/PI? .C21ZS+=WM@99X].>[T^&="1*P.%('?G./KD=C6+I?B36-#BDCTK5)
MK5'.6551USZ[7! /N!GBHFUW59-775IM5NI;]2-L[/C:/15&%4=>``#DYZU+
MP==4I8>-K/FL[N^MWM;SM>^P+%4G*-65[JVG32W]6[G3)JFH^)?AYKMSXC=;
MF2R>(VETT*(5=B T:[0/]GW^;GM727^OZC!\2M.T1)(O[*N8(A<VQ@0B8NI!
M+,02> HZCA17G&K>(=8UY(H]6U:>[BB8LD15$3=ZD(J[B.V<XR<4V37=2EUB
M/5I;]GOH@HBE,:#8%Z `+@XSW!K#^RYS=Y))>]9=%=)+IW5S=YA!+W6V^]O.
M_P"1V>GZQJ6B>$_&$6G77D#3KY8[0B)#Y8:<JV 00<CUS6=:W<\WP;N(KN1Y
M8K?4XXU'`.S*L1D#G)9CD^M<P=5OS:7ML;YS%?2B:['EI^^8-O&?EXYY^7%(
M-2NAI3:6MVR6#RB:2$(I#.,8))&[L.A%:1RV:U=K\T7?T2O\[W^\F6/ALKV]
M_P#&]OT/6I-<BT#6?.G\0Z98^'4LE:+1\+'=+E01A,;]Q.>_X=ZX/5C+/\*M
M`?\`>L6OYB^]BS9.X_,>YKH[;QS8V4L-S/XSU.[MHX@7TM](4O(=F-GFA,=?
M]KV+=ZXRQ\6ZUIJSC2KY]-AGF:;[/&D<BID\*-RD# P.,=*X,'A*O,W&.L6G
MK=)VOHVU>^N^IU5\3!4U=Z.ZZ.UUT2>WW'HT+/;?$&W,B9,/AM28W'<$Y!'X
M5QWAG4]>\3Z^-3U+7)X%TJTDN=T%O'^[CQAEC3;@D@X!8,>!UK&;Q-K;WSWS
MZM*UXUM]E\YHHB?+]/NXYR>2,^]5=+U.[T6Y6YTV[>VN%0H)% /!]000?Q!Y
M`KLI974C"7-;FY;+K;>_3JF<U3'TVXJ-[75^ETE'_)G<>)]56^\+Z#XDLI+X
MWD>H&..YOX(5F( 8\^6-A4$<<>N:J?$GQ!K4/C#[+'?.EK9O#<6\7EIA9-F=
MV2N3R3P21[5SFI>)]<UBV^S:EJ\UU 9!(4>*(#<!@?=4$?ACJ:34/$NM:I8Q
MV-]JLTUG&5*PLB?PC RP7<?Q-/#Y94A*#G%-)O2^R=K=.FO;<*N.IR4E%O5+
M6W5-^?5:'I%];177Q2OKB2W2ZN;31Q<6L#C<&E'3CN>:YE-4U'Q-\/-=N?$;
MK<R63Q&TNFA1"KL0&C7:!_L^_P`W/:N:EU_5)]975Y=1E:_3`290J%0.@PH`
MQR>N<]\TNK>(M9UY(H]6U:>[BB8LD15$3=ZD(J[B.V<XR<5%/*ZT.6]KKEUN
M[QL[NVG7Y#^OTFV]?NWTMK\STB_U_48/B5INB))%_95S!$+BV,*$3%U8$L2"
M3P%'4<**\GUFV2VUW4;>( 1Q74L:`<8`<@?RJ_)KVI2ZQ'JTM\SWT0412F-!
ML"] `%P<9[@U1EE:XFDGGE,LTKM)([ `LS$DG `'4]A77@<!+#R3=OAL[=7?
M?[C#$XR-6#2[JWI;7\3N-6U#2K#P9X4&HZ NJL]M+Y9:]>W\L!ES]T'.<CKZ
M54\!WTNFZ#XLOX(HA-%:+)&CC>JMEL=>N#C\JS+3QIXDT^TBM++6I+>VB7:D
M:P0L`/JR$_K56X\1ZS=_;C<:K+(U^BQW+&*(&1%&`O"8`^F#[UA_9]9TYTFE
M:3O?F?\`-?:UEIV-8XRDG3E_*ET\K;G4^%?$FL3Z7XLUF]N_ME]#8Q^4TT:[
M5P6V_*H`P"<].:C\.:GJ>H:;XC\27$_V_7K*VC2TDEB0^0IW9=44!1CD]/7/
M4UR$&HW5I9W=I:W)AAO%"7"JBGS%';)!QU[8-/TW5;S1[L76FW<EM. 5WI@Y
M![$'((]B".*NIE:?M'!)7M;T5KKROMH1#,&N3FN[-W\^WW';1WESKGA?0]7U
MK;)J2:U%!!=&-4>:/.2/E & =W0?P^N:R/B'XDUBY\0ZIHWVORM+BF4?9HHU
M4.0`<LV-Q)//7'3BL6]\0:OJFH6U]J.J374]J08"ZHJQD'.0JJ%S[D9XQTJI
M=7<U_>37EY.9[F9M\DC*JECTZ* .WI1A\ME&LJE5*RO9;V;:M;3R?S8ZN.C[
M-Q@W?37OO?\`-(SMAHV&K?R>U'R>U>QRH\WG*FPT;#5OY/:CY/:CE0<Y4V&C
M8:M_)[4?)[4<J#G*FPT;*M_)[483UHY4/G*>RC95O">M&$]:.5!SE391LJWA
M/6C">M'*@YRILHV5;PGK1A/6CE0<Y4V4;*MX3UHPGK1RH.<J;*-E6\)ZT83U
MHY4'.5-E&RK>$]:,)ZT<J#G*FRC95O">M&$]:.5!SE391LJWA/6C">M'*@YR
MILHV5;PGK1A/6CE0<Y;\+I_Q5VB_]?\`!_Z,6NYT'3[K6;B*&T)4J S2]!&/
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MH/\`F%?^3,O_`,57+?!?_CQU#_<@_G)7J5?*YQB\13QM2,)M+39OLCLPE&G*
MDG**>_3S9RW_``KGPI_T"S_X$R__`!5'_"N?"G_0+/\`X$R__%5U-%>9]>Q7
M_/V7WO\`S.CZO1_D7W(Y;_A7/A3_`*!9_P# F7_XJC_A7/A3_H%G_P`"9?\`
MXJNIHH^O8K_G[+[W_F'U>C_(ON1RW_"N?"G_`$"S_P"!,O\`\51_PKGPI_T"
MS_X$R_\`Q5=311]>Q7_/V7WO_,/J]'^1?<CEO^%<^%/^@6?_``)E_P#BJ/\`
MA7/A3_H%G_P)E_\`BJZFBCZ]BO\`G[+[W_F'U>C_`"+[D<M_PKGPI_T"S_X$
MR_\`Q5'_``KGPI_T"S_X$R__`!5=311]>Q7_`#]E][_S#ZO1_D7W(Y;_`(5S
MX4_Z!9_\"9?_`(JC_A7/A3_H%G_P)E_^*KJ:*/KV*_Y^R^]_YA]7H_R+[D<M
M_P`*Y\*?] L_^!,O_P`51_PKGPI_T"S_`.!,O_Q5=311]>Q7_/V7WO\`S#ZO
M1_D7W(Y;_A7/A3_H%G_P)E_^*H_X5SX4_P"@6?\`P)E_^*KJ:*/KV*_Y^R^]
M_P"8?5Z/\B^Y'+?\*Y\*?] L_P#@3+_\51_PKGPI_P! L_\`@3+_`/%5U-%'
MU[%?\_9?>_\`,/J]'^1?<CEO^%<^%/\`H%G_`,"9?_BJ/^%<^%/^@6?_``)E
M_P#BJZFBCZ]BO^?LOO?^8?5Z/\B^Y'+?\*Y\*?\`0+/_`($R_P#Q5'_"N?"G
M_0+/_@3+_P#%5U-%'U[%?\_9?>_\P^KT?Y%]R.6_X5SX4_Z!9_\``F7_`.*H
M_P"%<^%/^@6?_ F7_P"*KJ:*/KV*_P"?LOO?^8?5Z/\`(ON1RW_"N?"G_0+/
M_@3+_P#%4?\`"N?"G_0+/_@3+_\`%5U-%'U[%?\`/V7WO_,/J]'^1?<CEO\`
MA7/A3_H%G_P)E_\`BJ/^%<^%/^@6?_ F7_XJNIHH^O8K_G[+[W_F'U>C_(ON
M1RW_``KGPI_T"S_X$R__`!5'_"N?"G_0+/\`X$R__%5U-%'U[%?\_9?>_P#,
M/J]'^1?<CEO^%<^%/^@6?_ F7_XJC_A7/A3_`*!9_P# F7_XJNIHH^O8K_G[
M+[W_`)A]7H_R+[D<M_PKGPI_T"S_`.!,O_Q5'_"N?"G_`$"S_P"!,O\`\574
MT4?7L5_S]E][_P`P^KT?Y%]R.6_X5SX4_P"@6?\`P)E_^*H_X5SX4_Z!9_\`
M`F7_`.*KJ:*/KV*_Y^R^]_YA]7H_R+[D<M_PKGPI_P! L_\`@3+_`/%4?\*Y
M\*?]`L_^!,O_`,574T4?7L5_S]E][_S#ZO1_D7W(Y;_A7/A3_H%G_P`"9?\`
MXJD_X5QX3_Z!1_\``F7_`.*KJJ*/KV*_Y^R^]_YA]7I?RK[D<K_PKCPG_P!
MK_R9E_\`BJ/^%<>$_P#H%?\`DS+_`/%5U5%'U[%?\_9?>_\`,/J]+^5?<CE?
M^%<>$_\`H%?^3,O_`,51_P`*X\)_] K_`,F9?_BJZJBCZ]BO^?LOO?\`F'U>
ME_*ON1RO_"N/"?\`T"O_`"9E_P#BJ/\`A7'A/_H%?^3,O_Q5=511]>Q7_/V7
MWO\`S#ZO2_E7W(Y7_A7'A/\`Z!7_`),R_P#Q5'_"N/"?_0*_\F9?_BJZJBCZ
M]BO^?LOO?^8?5Z7\J^Y'*_\`"N/"?_0*_P#)F7_XJC_A7'A/_H%?^3,O_P`5
M7544?7L5_P`_9?>_\P^KTOY5]R.5_P"%<>$_^@5_Y,R__%4?\*X\)_\`0*_\
MF9?_`(JNJHH^O8K_`)^R^]_YA]7I?RK[D<K_`,*X\)_]`K_R9E_^*H_X5QX3
M_P"@5_Y,R_\`Q5=511]>Q7_/V7WO_,/J]+^5?<CE?^%<>$_^@5_Y,R__`!5'
M_"N/"?\`T"O_`"9E_P#BJZJBCZ]BO^?LOO?^8?5Z7\J^Y'*_\*X\)_\`0*_\
MF9?_`(JC_A7'A/\`Z!7_`),R_P#Q5=511]>Q7_/V7WO_`##ZO2_E7W(Y7_A7
M'A/_`*!1_P# F7_XJC_A6_A,_P#,*_\`)F7_`.*KJJ*/KV*_Y^R^]_YA]7I?
MRK[D<K_PK?PE_P! G_R8E_\`BJ3_`(5MX2_Z!/\`Y,2__%5U=%'U[%?\_9?>
M_P#,/84OY5]R/F7XEZ;::/XKNK"PA\FVCV;(]Q;&8U)Y))ZDT5;^+W_(^7O_
M`&S_`/1245]I2DY4:<I.[<8_DCSTDFTN[_,[SX+_`/'CJ'^Y#_.2O4Z\L^"_
M_'AJ'^Y#_.6O1-<OI=,\/ZE?PJC2VMK+,@<$J65"1G';BOEL\_W^I\OR1VX%
M-THI=W^;//O'/C^[AOKK1='=8EC'E7%VIR^[C*QD'Y<<J3USD#:5R?-KZ*66
M]E;4%EDO`VV5KK+29'&&+<Y&,<],8J;2+Z71=0M+VV6-Y;5U=!,@=21ZC^HP
M1U!!P:]A?0-"^*5G:Z];M+872R"*\"*"6V@90GH2`1A^>#R.,+\Q[V(;L]>W
MD?J,88;)804Z=XM>]/=\WFM[/RZGEVB>(-;\."*XL9Y1:?/&D$^YK8G@L N0
M`06!^7!YYX)!]J\,^)+3Q/I*WEN/+E4[)X"V6B?T]P>H/&1V'0>?_$+Q-8BW
M7PCHMG%%86$FV1S'SYBD@A,\C!SENK$GG&2V/\.=3ET_Q<D`=O(NX]DJCG)!
MPGZO]?USI1FX5/97NOU/-SC!0Q.!>/\`9^SDM;=XMZ7[/6_4]?U[5)='TE[R
M&W2XE\V*)(GE,:DO(J#+!6P!NST/2H[?5;F"2&'6X+6SFN9/+MQ;SR3HYQG!
M<Q(%/!P#U[4SQ5I,VM^'YK&"*VE=Y(G\JY8B.0)(KE

Alex Chapiro

Re: Debugging problems in 6.2.1a

Post by Alex Chapiro » Wed Aug 13, 2003 12:14 pm

I'm sorry, but the version you tested was barely later than early release of
Patch A candidate (tagget 11/03/03). I can see it from the supplemented
trace log. It doesn't make sence to play with it. Could you please do the
same using Patch B installation?

Alex

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhd4tk$n9m$1@inn.qnx.com...
Ok, now I performed the following steps:
1. I deleted all debug targets
2. I closed the IDE
3. I removed my .log file
4. I started the IDE
5. I tried to debug my app as a "local application

the result was the error message box in locApp.bmp and the log file
locApp.log

The I performed the following steps:
1. I removed my .log file
2. I started the IDE
5. I created a new "launch configuration" QNX QConn (IP); the only change
I
did was to specify my target
6. I pressed the debug button

the result was the error message box in qconnApp.bmp and the log file
qconnApp.log

The problem is the second "tabletest_mb" directory.
The real path is "E:\Pro\MED_ETX1\code\tabletest_mb\x86\o-g"
and NOT "E:\Pro\MED_ETX1\code\tabletest_mb\tabletest_mb\x86\o-g"
but who made a mistake and how can I correct the mistake?


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhb66r$ajt$1@inn.qnx.com...
I don't think it is a good idea. This is the first case we run into this
problem.
Unfortunately the log you send me does not correspond the described
problem.
If you installed Patch B, please remove .log, start IDE, try operation
you
cannot perform, close IDE and send me .log together with snapshot of the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem I've
installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I believe
it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after having
tried
to
debug my application.

Meanwhile I think it would be the best to reinstall Momentics version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics IDE
dialog.
For target please check the date of build for /usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses version
6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I determine
the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I guess
before
continuing of this issue investigation it is a good time to ask
you
which
version are you using on your host and on your target? Host
build
version
you can find in about dialog. As far as I remember, we never
shipped
6.2.1A.
This is important to know in order to look at correct code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to target
using
file
system
navigator. Even larger files (10MB instead of 470kB) can be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs while
transferring
file
from
host to target. Exception message is just an errno
description.
Could
you
please try to copy the same file from host to /tmp on
target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the space used
does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so, how much
space
it
uses
currently? It can easily exhaust your target memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application trying to
debug.
I have 128MB RAM on my target and I can't debug a
"hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com> schrieb im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out of memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun 17, 2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at













com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at













com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at













com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at













com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform
FileTransfer(LaunchConfigurationDelegate.java:443)
at













com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at













org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at













org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at













org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503 Jun 17, 2003
12:47:13.220
!MESSAGE Can't transfer file for etx : Open Not
enough
memory
!STACK 0
java.io.IOException: Open Not enough memory
at













com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at













com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at













com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at













com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform
FileTransfer(LaunchConfigurationDelegate.java:443)
at













com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at













org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at













org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at













org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr 07, 2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at
org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at
org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at






org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at













org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at













org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at













org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at













org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at













org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at













org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at


org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at













org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at
org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at













org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at













org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at













org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at













org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at

org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at
org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at


org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at

org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at


org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at
org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at













org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at
org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at java.lang.reflect.Method.invoke(Native Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at
org.eclipse.core.launcher.Main.run(Main.java:703)
at
org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP PC an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C Application
Project".

Regards

Rüdiger

P.S. I've heard of a patchB for Momentics 6.2.1
that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb im
Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos" <Ruediger.Loos@3soft.de> wrote:
Hallo,

I have a big problem in debugging my QNX
application.
I build my apps without any error and warning.
But when I start to debug my apps, I get a
"Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing: Exec
error:Launching
failed"
or
"Exception occured : Not enough memory"

Can anybody help me.

There's probably a .log file generated in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX C/C++?
Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if you have
further
questions.




























Rüdiger Loos

Re: Debugging problems in 6.2.1a

Post by Rüdiger Loos » Wed Aug 13, 2003 1:11 pm

I've been trying to get patchB for at least two weeks over myQNX but I
didn't succeed :-(
QNX support promised me now that they'll send me the patch til Friday 10 o'
clock.

Thank you for your support til now Alex. When I have the patch installed and
run my program I'll tell you whether I was successful or not.

Thanks a lot
Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhd8o3$po6$1@inn.qnx.com...
I'm sorry, but the version you tested was barely later than early release
of
Patch A candidate (tagget 11/03/03). I can see it from the supplemented
trace log. It doesn't make sence to play with it. Could you please do the
same using Patch B installation?

Alex

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhd4tk$n9m$1@inn.qnx.com...
Ok, now I performed the following steps:
1. I deleted all debug targets
2. I closed the IDE
3. I removed my .log file
4. I started the IDE
5. I tried to debug my app as a "local application

the result was the error message box in locApp.bmp and the log file
locApp.log

The I performed the following steps:
1. I removed my .log file
2. I started the IDE
5. I created a new "launch configuration" QNX QConn (IP); the only
change
I
did was to specify my target
6. I pressed the debug button

the result was the error message box in qconnApp.bmp and the log file
qconnApp.log

The problem is the second "tabletest_mb" directory.
The real path is "E:\Pro\MED_ETX1\code\tabletest_mb\x86\o-g"
and NOT "E:\Pro\MED_ETX1\code\tabletest_mb\tabletest_mb\x86\o-g"
but who made a mistake and how can I correct the mistake?


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhb66r$ajt$1@inn.qnx.com...
I don't think it is a good idea. This is the first case we run into
this
problem.
Unfortunately the log you send me does not correspond the described
problem.
If you installed Patch B, please remove .log, start IDE, try operation
you
cannot perform, close IDE and send me .log together with snapshot of
the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem I've
installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I believe
it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after having
tried
to
debug my application.

Meanwhile I think it would be the best to reinstall Momentics
version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics IDE
dialog.
For target please check the date of build for /usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses version
6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I determine
the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I guess
before
continuing of this issue investigation it is a good time to
ask
you
which
version are you using on your host and on your target? Host
build
version
you can find in about dialog. As far as I remember, we never
shipped
6.2.1A.
This is important to know in order to look at correct code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to target
using
file
system
navigator. Even larger files (10MB instead of 470kB) can be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs while
transferring
file
from
host to target. Exception message is just an errno
description.
Could
you
please try to copy the same file from host to /tmp on
target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the space used
does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so, how much
space
it
uses
currently? It can easily exhaust your target memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application trying to
debug.
I have 128MB RAM on my target and I can't debug a
"hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com> schrieb im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out of
memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun 17, 2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at














com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at














com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at














com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at














com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at














com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at














org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at














org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at














org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503 Jun 17,
2003
12:47:13.220
!MESSAGE Can't transfer file for etx : Open Not
enough
memory
!STACK 0
java.io.IOException: Open Not enough memory
at














com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at














com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at














com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at














com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at














com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at














org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at














org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at














org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr 07, 2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at
org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at

org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at







org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at














org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at














org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at














org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at














org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at














org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at














org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at



org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at














org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at

org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at














org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at














org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at














org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at














org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at

org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at
org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at


org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at

org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at


org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at
org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at














org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at
org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at java.lang.reflect.Method.invoke(Native
Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at
org.eclipse.core.launcher.Main.run(Main.java:703)
at
org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP PC an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C Application
Project".

Regards

Rüdiger

P.S. I've heard of a patchB for Momentics 6.2.1
that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb im
Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos" <Ruediger.Loos@3soft.de
wrote:
Hallo,

I have a big problem in debugging my QNX
application.
I build my apps without any error and
warning.
But when I start to debug my apps, I get a
"Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing: Exec
error:Launching
failed"
or
"Exception occured : Not enough memory"

Can anybody help me.

There's probably a .log file generated in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX C/C++?
Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if you have
further
questions.






























Rüdiger Loos

Re: Debugging problems in 6.2.1a

Post by Rüdiger Loos » Thu Aug 14, 2003 11:45 am

Now I got PatchB and I've installed it immediately.
But, no way again :-((
now I get the following timeout message while trying to attatch to debugger:
-----------------------------
java.version=1.3.1_04
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86 -feature
com.qnx.tools.ide -install file:C:/QNXsdk/host/win32/x86/usr/qde/eclipse/
!ENTRY org.eclipse.jdt.launching 4 4 Aug 14, 2003 13:24:34.841
!MESSAGE VM type element with unknown id
!ENTRY org.eclipse.debug.ui 4 120 Aug 14, 2003 13:38:23.186
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing: Timedout
at
com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at
com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at
com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at
org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at
org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at
org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
..java:98)
!ENTRY org.eclipse.cdt.launch 4 150 Aug 14, 2003 13:38:23.186
!MESSAGE CDI Error: Error initializing: Timedout
!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing: Timedout
at
com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at
com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at
com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at
org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at
org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at
org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
..java:98)

-----------------------------
I can try to debug the app on my host or on the target, same result.
Do you have any idea? Perhaps I have to update same programs on my target?

regards
Rüdiger


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> schrieb im Newsbeitrag
news:bhdcp2$stl$1@inn.qnx.com...
I've been trying to get patchB for at least two weeks over myQNX but I
didn't succeed :-(
QNX support promised me now that they'll send me the patch til Friday 10
o'
clock.

Thank you for your support til now Alex. When I have the patch installed
and
run my program I'll tell you whether I was successful or not.

Thanks a lot
Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhd8o3$po6$1@inn.qnx.com...
I'm sorry, but the version you tested was barely later than early
release
of
Patch A candidate (tagget 11/03/03). I can see it from the supplemented
trace log. It doesn't make sence to play with it. Could you please do
the
same using Patch B installation?

Alex

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhd4tk$n9m$1@inn.qnx.com...
Ok, now I performed the following steps:
1. I deleted all debug targets
2. I closed the IDE
3. I removed my .log file
4. I started the IDE
5. I tried to debug my app as a "local application

the result was the error message box in locApp.bmp and the log file
locApp.log

The I performed the following steps:
1. I removed my .log file
2. I started the IDE
5. I created a new "launch configuration" QNX QConn (IP); the only
change
I
did was to specify my target
6. I pressed the debug button

the result was the error message box in qconnApp.bmp and the log file
qconnApp.log

The problem is the second "tabletest_mb" directory.
The real path is "E:\Pro\MED_ETX1\code\tabletest_mb\x86\o-g"
and NOT "E:\Pro\MED_ETX1\code\tabletest_mb\tabletest_mb\x86\o-g"
but who made a mistake and how can I correct the mistake?


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhb66r$ajt$1@inn.qnx.com...
I don't think it is a good idea. This is the first case we run into
this
problem.
Unfortunately the log you send me does not correspond the described
problem.
If you installed Patch B, please remove .log, start IDE, try
operation
you
cannot perform, close IDE and send me .log together with snapshot of
the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem I've
installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I believe
it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after
having
tried
to
debug my application.

Meanwhile I think it would be the best to reinstall Momentics
version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics IDE
dialog.
For target please check the date of build for /usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses version
6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I
determine
the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I guess
before
continuing of this issue investigation it is a good time to
ask
you
which
version are you using on your host and on your target? Host
build
version
you can find in about dialog. As far as I remember, we never
shipped
6.2.1A.
This is important to know in order to look at correct code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to target
using
file
system
navigator. Even larger files (10MB instead of 470kB) can
be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs while
transferring
file
from
host to target. Exception message is just an errno
description.
Could
you
please try to copy the same file from host to /tmp on
target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the space used
does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im
Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so, how
much
space
it
uses
currently? It can easily exhaust your target
memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application trying
to
debug.
I have 128MB RAM on my target and I can't debug a
"hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com> schrieb
im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out of
memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun 17, 2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503 Jun 17,
2003
12:47:13.220
!MESSAGE Can't transfer file for etx : Open
Not
enough
memory
!STACK 0
java.io.IOException: Open Not enough memory
at















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr 07, 2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at
org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at

org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at







org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at



org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at

org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at















org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at















org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at















org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at















org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at

org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at
org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at


org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at

org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at


org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at
org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at















org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at
org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at java.lang.reflect.Method.invoke(Native
Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at
org.eclipse.core.launcher.Main.run(Main.java:703)
at
org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP PC an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C Application
Project".

Regards

Rüdiger

P.S. I've heard of a patchB for Momentics
6.2.1
that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb im
Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos" <Ruediger.Loos@3soft.de
wrote:
Hallo,

I have a big problem in debugging my QNX
application.
I build my apps without any error and
warning.
But when I start to debug my apps, I get a
"Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing: Exec
error:Launching
failed"
or
"Exception occured : Not enough memory"

Can anybody help me.

There's probably a .log file generated in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX C/C++?
Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if you
have
further
questions.
































Jack Rosenbloom

Re: Debugging problems in 6.2.1a

Post by Jack Rosenbloom » Thu Aug 14, 2003 12:03 pm

for all this talk about patch B solving problems, I have been unable to
debug any program with it. Constant errors opening temp directory.
This occurs on 2 different win2K development systems and two different
qnx targets. I find the bugs in 6.2.1a easier to deal with so I rolled
back and reported the mess to QNX waiting for them to get their act
together.

I have been an QNX4 user for a long time. Am I the only one who feels
that QNX has lost their ability to create quality SW?

Jack

Bill Caroselli wrote:
Is this patch B available to an evaluation copy of PE?
I have to admit, for the amount of extra cost of PE over SE,
so far I am NOT impressed!


Alex Chapiro <achapiro@qnx.com> wrote:
AC > It seems to be another problem that has been fixed at the early stage of
AC > Patch B beta program.

AC > Alex Chapiro.


AC > "Bill Caroselli" <qtps@earthlink.net> wrote in message
AC > news:bhb7qd$bvn$1@inn.qnx.com...

"Rdiger Loos <Ruediger.Loos@3soft.de> wrote:
RdL > Hallo,

RdL > I have a big problem in debugging my QNX application.
RdL > I build my apps without any error and warning.
RdL > But when I start to debug my apps, I get a "Launch Configuration

AC > Error" with

RdL > one of the following informations:
RdL > "Exception occured processing launch configuration. Reason: Failed

AC > Launching

RdL > CDI Debugger: Error initializing: Exec error:Launching failed" or
RdL > "Exception occured : Not enough memory"

I have a similar problem. I'm running 6.2.1A PE (Evaluation)

I am trying the debug the sample "Hello World" program that the IDE
creates when you select create a new "QNX C Application Project".

I built it without errors.

I created a new Launch Configuration and selected the debug version of
the executable and said to debug the program. I expected it to stop
at main().

Instead I got a pop up dialog that says: "Exception occured while
launching configuration. See log for more information. Reason: Failed
launching CDI Debugger : Not supported - this should not ever be
called."

The .metadata/.log file follows:
!SESSION Aug 12, 2003

AC > 12:21:13.478 ---------------------------------------------

java.version=1.3.0 subset
java.vendor=IBM Corporation
BootLoader constants: OS=qnx, ARCH=x86, WS=photon, NL=en_US
Command-line arguments: -os qnx -ws photon -arch x86 -data

AC > /root/workspace -install file:/usr/qde/eclipse/

!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.480
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.485
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.585
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.589
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.debug.ui 4 120 Aug 12, 2003 12:24:56.454
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:

AC > org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should not
AC > ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V


AC > com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
AC > org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
AC > e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;

AC > org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
AC > g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
AC > ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V

AC > org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
AC > ;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
AC > ;

AC > org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
AC > $10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V

org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

!ENTRY org.eclipse.cdt.launch 4 150 Aug 12, 2003 12:24:56.457
!MESSAGE Failed Launching CDI Debugger : Not Supported - this should not

AC > ever be called!

!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this should

AC > not ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V
org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V


AC > com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
AC > org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
AC > e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;

AC > org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
AC > g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
AC > ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V

AC > org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
AC > ;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
AC > ;

AC > org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
AC > $10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V

org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V




Alex Chapiro

Re: Debugging problems in 6.2.1a

Post by Alex Chapiro » Thu Aug 14, 2003 12:09 pm

Could you please try to increase debugger timeout (see
Window/Preferences/C\C++/Debug/GDB MI) ?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhfs3u$ngt$1@inn.qnx.com...
Now I got PatchB and I've installed it immediately.
But, no way again :-((
now I get the following timeout message while trying to attatch to
debugger:
-----------------------------
java.version=1.3.1_04
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86 -feature
com.qnx.tools.ide -install file:C:/QNXsdk/host/win32/x86/usr/qde/eclipse/
!ENTRY org.eclipse.jdt.launching 4 4 Aug 14, 2003 13:24:34.841
!MESSAGE VM type element with unknown id
!ENTRY org.eclipse.debug.ui 4 120 Aug 14, 2003 13:38:23.186
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing: Timedout
at

com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at

com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at

com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at

org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at

org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at

org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY org.eclipse.cdt.launch 4 150 Aug 14, 2003 13:38:23.186
!MESSAGE CDI Error: Error initializing: Timedout
!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing: Timedout
at

com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at

com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at

com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at

org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at

org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at

org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)

-----------------------------
I can try to debug the app on my host or on the target, same result.
Do you have any idea? Perhaps I have to update same programs on my target?

regards
Rüdiger


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> schrieb im Newsbeitrag
news:bhdcp2$stl$1@inn.qnx.com...
I've been trying to get patchB for at least two weeks over myQNX but I
didn't succeed :-(
QNX support promised me now that they'll send me the patch til Friday 10
o'
clock.

Thank you for your support til now Alex. When I have the patch installed
and
run my program I'll tell you whether I was successful or not.

Thanks a lot
Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhd8o3$po6$1@inn.qnx.com...
I'm sorry, but the version you tested was barely later than early
release
of
Patch A candidate (tagget 11/03/03). I can see it from the
supplemented
trace log. It doesn't make sence to play with it. Could you please do
the
same using Patch B installation?

Alex

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhd4tk$n9m$1@inn.qnx.com...
Ok, now I performed the following steps:
1. I deleted all debug targets
2. I closed the IDE
3. I removed my .log file
4. I started the IDE
5. I tried to debug my app as a "local application

the result was the error message box in locApp.bmp and the log file
locApp.log

The I performed the following steps:
1. I removed my .log file
2. I started the IDE
5. I created a new "launch configuration" QNX QConn (IP); the only
change
I
did was to specify my target
6. I pressed the debug button

the result was the error message box in qconnApp.bmp and the log
file
qconnApp.log

The problem is the second "tabletest_mb" directory.
The real path is "E:\Pro\MED_ETX1\code\tabletest_mb\x86\o-g"
and NOT "E:\Pro\MED_ETX1\code\tabletest_mb\tabletest_mb\x86\o-g"
but who made a mistake and how can I correct the mistake?


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhb66r$ajt$1@inn.qnx.com...
I don't think it is a good idea. This is the first case we run
into
this
problem.
Unfortunately the log you send me does not correspond the
described
problem.
If you installed Patch B, please remove .log, start IDE, try
operation
you
cannot perform, close IDE and send me .log together with snapshot
of
the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem I've
installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I
believe
it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after
having
tried
to
debug my application.

Meanwhile I think it would be the best to reinstall Momentics
version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics IDE
dialog.
For target please check the date of build for /usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses version
6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I
determine
the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I
guess
before
continuing of this issue investigation it is a good time
to
ask
you
which
version are you using on your host and on your target?
Host
build
version
you can find in about dialog. As far as I remember, we
never
shipped
6.2.1A.
This is important to know in order to look at correct
code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to
target
using
file
system
navigator. Even larger files (10MB instead of 470kB) can
be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs while
transferring
file
from
host to target. Exception message is just an errno
description.
Could
you
please try to copy the same file from host to /tmp on
target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the space
used
does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im
Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so, how
much
space
it
uses
currently? It can easily exhaust your target
memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application
trying
to
debug.
I have 128MB RAM on my target and I can't debug
a
"hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com> schrieb
im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out of
memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote
in
message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun 17,
2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at
















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at
















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at
















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at
















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at
















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at
















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at
















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at
















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503 Jun
17,
2003
12:47:13.220
!MESSAGE Can't transfer file for etx : Open
Not
enough
memory
!STACK 0
java.io.IOException: Open Not enough memory
at
















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at
















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at
















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at
















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at
















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at
















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at
















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at
















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr 07,
2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at

org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at

org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at








org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at
















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at
















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at
















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at
















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at
















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at
















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at



org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at
















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at

org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at
















org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at
















org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at
















org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at
















org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at

org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at
org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at


org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at


org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at


org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at
org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at
















org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at
org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at java.lang.reflect.Method.invoke(Native
Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at
org.eclipse.core.launcher.Main.run(Main.java:703)
at
org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP PC
an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C Application
Project".

Regards

Rüdiger

P.S. I've heard of a patchB for Momentics
6.2.1
that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb im
Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos" <Ruediger.Loos@3soft.de
wrote:
Hallo,

I have a big problem in debugging my QNX
application.
I build my apps without any error and
warning.
But when I start to debug my apps, I get
a
"Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing: Exec
error:Launching
failed"
or
"Exception occured : Not enough memory"

Can anybody help me.

There's probably a .log file generated in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX C/C++?
Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if you
have
further
questions.


































Bill Caroselli

Re: Debugging problems in 6.2.1a

Post by Bill Caroselli » Thu Aug 14, 2003 12:57 pm

Jack Rosenbloom <jrosenbloom@vertisinc.com> wrote:
JR > for all this talk about patch B solving problems, I have been unable to
JR > debug any program with it. Constant errors opening temp directory.
JR > This occurs on 2 different win2K development systems and two different
JR > qnx targets. I find the bugs in 6.2.1a easier to deal with so I rolled
JR > back and reported the mess to QNX waiting for them to get their act
JR > together.

JR > I have been an QNX4 user for a long time. Am I the only one who feels
JR > that QNX has lost their ability to create quality SW?

JR > Jack

Despite my desire to try to be politically correct, I'll jump in here
anyway.

I (also) find that in QNX6 there is *way too much time* between releases.
They say that it is because they spend so much time in QA. But as you
said . . . .

The problem is that they are concentrating on the markets that they want
to get into rather than where their existing customers currently are.

If anyone says that more frequently software releases looks bad (image
wise) I would argue. I found that in QNX4 days it was much easier for
them to post a new version of software as beta and let those who wished
test it till their hearts content. If they like it they can use it. If
not, they don't have to use it. BUT . . . if they use it and find a bug
and report it, the bug can get fixed and a newer beta version be
offered. I don't mind this MO. I like it. It gets hundreds, possibly
thousands of different users testing their software in different ways.
It gets QUALITY SOFTWARE out there faster. When a version has gone 6
months without reported bugs, then just call it a release.

Rüdiger Loos

Re: Debugging problems in 6.2.1a

Post by Rüdiger Loos » Thu Aug 14, 2003 1:26 pm

That was exactly my idea too. I increased timeout up to 30000ms. But, no
way.
By the way, the log I sent is the log-file of a test with 30000ms.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhfsvc$o45$1@inn.qnx.com...
Could you please try to increase debugger timeout (see
Window/Preferences/C\C++/Debug/GDB MI) ?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhfs3u$ngt$1@inn.qnx.com...
Now I got PatchB and I've installed it immediately.
But, no way again :-((
now I get the following timeout message while trying to attatch to
debugger:
-----------------------------
java.version=1.3.1_04
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86 -feature
com.qnx.tools.ide -install
file:C:/QNXsdk/host/win32/x86/usr/qde/eclipse/
!ENTRY org.eclipse.jdt.launching 4 4 Aug 14, 2003 13:24:34.841
!MESSAGE VM type element with unknown id
!ENTRY org.eclipse.debug.ui 4 120 Aug 14, 2003 13:38:23.186
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing:
Timedout
at


com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at


com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at


com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at


org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at


org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at


org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY org.eclipse.cdt.launch 4 150 Aug 14, 2003 13:38:23.186
!MESSAGE CDI Error: Error initializing: Timedout
!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing:
Timedout
at


com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at


com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at


com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at


org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at


org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at


org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)

-----------------------------
I can try to debug the app on my host or on the target, same result.
Do you have any idea? Perhaps I have to update same programs on my
target?

regards
Rüdiger


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> schrieb im Newsbeitrag
news:bhdcp2$stl$1@inn.qnx.com...
I've been trying to get patchB for at least two weeks over myQNX but I
didn't succeed :-(
QNX support promised me now that they'll send me the patch til Friday
10
o'
clock.

Thank you for your support til now Alex. When I have the patch
installed
and
run my program I'll tell you whether I was successful or not.

Thanks a lot
Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhd8o3$po6$1@inn.qnx.com...
I'm sorry, but the version you tested was barely later than early
release
of
Patch A candidate (tagget 11/03/03). I can see it from the
supplemented
trace log. It doesn't make sence to play with it. Could you please
do
the
same using Patch B installation?

Alex

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhd4tk$n9m$1@inn.qnx.com...
Ok, now I performed the following steps:
1. I deleted all debug targets
2. I closed the IDE
3. I removed my .log file
4. I started the IDE
5. I tried to debug my app as a "local application

the result was the error message box in locApp.bmp and the log
file
locApp.log

The I performed the following steps:
1. I removed my .log file
2. I started the IDE
5. I created a new "launch configuration" QNX QConn (IP); the only
change
I
did was to specify my target
6. I pressed the debug button

the result was the error message box in qconnApp.bmp and the log
file
qconnApp.log

The problem is the second "tabletest_mb" directory.
The real path is "E:\Pro\MED_ETX1\code\tabletest_mb\x86\o-g"
and NOT "E:\Pro\MED_ETX1\code\tabletest_mb\tabletest_mb\x86\o-g"
but who made a mistake and how can I correct the mistake?


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhb66r$ajt$1@inn.qnx.com...
I don't think it is a good idea. This is the first case we run
into
this
problem.
Unfortunately the log you send me does not correspond the
described
problem.
If you installed Patch B, please remove .log, start IDE, try
operation
you
cannot perform, close IDE and send me .log together with
snapshot
of
the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem I've
installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I
believe
it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after
having
tried
to
debug my application.

Meanwhile I think it would be the best to reinstall Momentics
version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics
IDE
dialog.
For target please check the date of build for
/usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses
version
6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I
determine
the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I
guess
before
continuing of this issue investigation it is a good time
to
ask
you
which
version are you using on your host and on your target?
Host
build
version
you can find in about dialog. As far as I remember, we
never
shipped
6.2.1A.
This is important to know in order to look at correct
code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to
target
using
file
system
navigator. Even larger files (10MB instead of 470kB)
can
be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im
Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs while
transferring
file
from
host to target. Exception message is just an errno
description.
Could
you
please try to copy the same file from host to /tmp
on
target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the space
used
does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im
Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so,
how
much
space
it
uses
currently? It can easily exhaust your target
memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application
trying
to
debug.
I have 128MB RAM on my target and I can't
debug
a
"hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com
schrieb
im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out of
memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de
wrote
in
message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun 17,
2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1

org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at

















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at

















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at

















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at

















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at

















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at

















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at

















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog

$10.run(LaunchConfigurationDialog.java:2299)
at

















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503 Jun
17,
2003
12:47:13.220
!MESSAGE Can't transfer file for etx :
Open
Not
enough
memory
!STACK 0
java.io.IOException: Open Not enough
memory
at

















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at

















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at

















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at

















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at

















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at

















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at

















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog

$10.run(LaunchConfigurationDialog.java:2299)
at

















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr 07,
2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1

org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at

org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at

org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at








org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at

















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at

















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at

















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at

















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at

















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at

















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at



org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at

















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at

org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at

















org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at

















org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at

















org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at

















org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at

org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at
org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at


org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at


org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at


org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at
org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at

















org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at
org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at java.lang.reflect.Method.invoke(Native
Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at
org.eclipse.core.launcher.Main.run(Main.java:703)
at
org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP PC
an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C
Application
Project".

Regards

Rüdiger

P.S. I've heard of a patchB for Momentics
6.2.1
that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb im
Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos" <Ruediger.Loos@3soft.de
wrote:
Hallo,

I have a big problem in debugging my
QNX
application.
I build my apps without any error and
warning.
But when I start to debug my apps, I
get
a
"Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing: Exec
error:Launching
failed"
or
"Exception occured : Not enough
memory"

Can anybody help me.

There's probably a .log file generated
in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX C/C++?
Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if you
have
further
questions.




































Rüdiger Loos

Re: Debugging problems in 6.2.1a

Post by Rüdiger Loos » Thu Aug 14, 2003 1:31 pm

Hi Jack,

that's my problem too. I've installed patchB hoping that solves all my
problems, but I still cannot debug ANY program :-(

Rüdiger

"Bill Caroselli" <qtps@earthlink.net> schrieb im Newsbeitrag
news:bhg0vn$qpg$1@inn.qnx.com...
Jack Rosenbloom <jrosenbloom@vertisinc.com> wrote:
JR > for all this talk about patch B solving problems, I have been unable
to
JR > debug any program with it. Constant errors opening temp directory.
JR > This occurs on 2 different win2K development systems and two
different
JR > qnx targets. I find the bugs in 6.2.1a easier to deal with so I
rolled
JR > back and reported the mess to QNX waiting for them to get their act
JR > together.

JR > I have been an QNX4 user for a long time. Am I the only one who
feels
JR > that QNX has lost their ability to create quality SW?

JR > Jack

Despite my desire to try to be politically correct, I'll jump in here
anyway.

I (also) find that in QNX6 there is *way too much time* between releases.
They say that it is because they spend so much time in QA. But as you
said . . . .

The problem is that they are concentrating on the markets that they want
to get into rather than where their existing customers currently are.

If anyone says that more frequently software releases looks bad (image
wise) I would argue. I found that in QNX4 days it was much easier for
them to post a new version of software as beta and let those who wished
test it till their hearts content. If they like it they can use it. If
not, they don't have to use it. BUT . . . if they use it and find a bug
and report it, the bug can get fixed and a newer beta version be
offered. I don't mind this MO. I like it. It gets hundreds, possibly
thousands of different users testing their software in different ways.
It gets QUALITY SOFTWARE out there faster. When a version has gone 6
months without reported bugs, then just call it a release.

Mikhail Khodjaiants

Re: Debugging problems in 6.2.1a

Post by Mikhail Khodjaiants » Thu Aug 14, 2003 2:54 pm

Could you please try the following:
Add the following command line entries (which must be before the -vmargs
options):

-debug <optionsfilename>

where <optionsfilesname> is the URL to the options file (i.e.
file:///temp/myfile) and <optionsfilename> would contain:

org.eclipse.cdt.debug.mi.core/debug=true

i.e.

C:\QNXsdk\host\win32\x86\usr\qde\eclipse\qde.exe -feature

com.qnx.tools.ide -debug "file:///temp/myfile.debug -vmargs

-Xms128m -Xmx256m

and the c:/temp/myfile.debug file would contain:

org.eclipse.cdt.debug.mi.core/debug=true

This will trace the raw commands from a session with the debugger to the
console.

Send me this output.

Thanks,

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhg21e$rqi$1@inn.qnx.com...
That was exactly my idea too. I increased timeout up to 30000ms. But, no
way.
By the way, the log I sent is the log-file of a test with 30000ms.

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhfsvc$o45$1@inn.qnx.com...
Could you please try to increase debugger timeout (see
Window/Preferences/C\C++/Debug/GDB MI) ?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhfs3u$ngt$1@inn.qnx.com...
Now I got PatchB and I've installed it immediately.
But, no way again :-((
now I get the following timeout message while trying to attatch to
debugger:
-----------------------------
java.version=1.3.1_04
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE
Command-line arguments: -os win32 -ws win32 -arch x86 -feature
com.qnx.tools.ide -install
file:C:/QNXsdk/host/win32/x86/usr/qde/eclipse/
!ENTRY org.eclipse.jdt.launching 4 4 Aug 14, 2003 13:24:34.841
!MESSAGE VM type element with unknown id
!ENTRY org.eclipse.debug.ui 4 120 Aug 14, 2003 13:38:23.186
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing:
Timedout
at



com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at



com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at



com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at



org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at



org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at



org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY org.eclipse.cdt.launch 4 150 Aug 14, 2003 13:38:23.186
!MESSAGE CDI Error: Error initializing: Timedout
!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Error initializing:
Timedout
at



com.qnx.tools.ide.qde.debug.internal.core.CGDBDebugger.createAttachSession(C
GDBDebugger.java:136)
at



com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.startDe
bugger(LaunchConfigurationDelegate.java:422)
at



com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:316)
at



org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at



org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog
$10.run(LaunchConfigurationDialog.java:2299)
at



org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)

-----------------------------
I can try to debug the app on my host or on the target, same result.
Do you have any idea? Perhaps I have to update same programs on my
target?

regards
Rüdiger


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> schrieb im Newsbeitrag
news:bhdcp2$stl$1@inn.qnx.com...
I've been trying to get patchB for at least two weeks over myQNX but
I
didn't succeed :-(
QNX support promised me now that they'll send me the patch til
Friday
10
o'
clock.

Thank you for your support til now Alex. When I have the patch
installed
and
run my program I'll tell you whether I was successful or not.

Thanks a lot
Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhd8o3$po6$1@inn.qnx.com...
I'm sorry, but the version you tested was barely later than early
release
of
Patch A candidate (tagget 11/03/03). I can see it from the
supplemented
trace log. It doesn't make sence to play with it. Could you please
do
the
same using Patch B installation?

Alex

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhd4tk$n9m$1@inn.qnx.com...
Ok, now I performed the following steps:
1. I deleted all debug targets
2. I closed the IDE
3. I removed my .log file
4. I started the IDE
5. I tried to debug my app as a "local application

the result was the error message box in locApp.bmp and the log
file
locApp.log

The I performed the following steps:
1. I removed my .log file
2. I started the IDE
5. I created a new "launch configuration" QNX QConn (IP); the
only
change
I
did was to specify my target
6. I pressed the debug button

the result was the error message box in qconnApp.bmp and the log
file
qconnApp.log

The problem is the second "tabletest_mb" directory.
The real path is "E:\Pro\MED_ETX1\code\tabletest_mb\x86\o-g"
and NOT "E:\Pro\MED_ETX1\code\tabletest_mb\tabletest_mb\x86\o-g"
but who made a mistake and how can I correct the mistake?


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhb66r$ajt$1@inn.qnx.com...
I don't think it is a good idea. This is the first case we run
into
this
problem.
Unfortunately the log you send me does not correspond the
described
problem.
If you installed Patch B, please remove .log, start IDE, try
operation
you
cannot perform, close IDE and send me .log together with
snapshot
of
the
error message box. I helps to identify the problem.

Thanks,

Alex
"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bhb0u0$750$1@inn.qnx.com...
Having heard the patchB to 6.2.1b shall solve my problem
I've
installed
the
patch. But, no way, I still have the same problem.
By the way, the Build ID is Build id: 200304070109
the date of build for /usr/sbin/qconn is 12th Aug 2003 - I
believe
it's
the
installation date.
The size of qconn on my target is 70708 Bytes.
The file attached contains the content of my .log file after
having
tried
to
debug my application.

Meanwhile I think it would be the best to reinstall
Momentics
version
6.2.0,
where this problem did not exist :-(

regards
Rüdiger Loos


"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bhak3c$r98$1@inn.qnx.com...
At least let me know Build ID from the About QNX Momentics
IDE
dialog.
For target please check the date of build for
/usr/sbin/qconn.

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in message
news:bha8mq$je7$1@inn.qnx.com...
We definitely have version 6.2.1a installed on out host.
As I've heard from our customer, his/our target uses
version
6.2.1,
but
we
don't know whether it is 6.2.1 or 6.2.1a.
When I have the target connected to my host, how can I
determine
the
version
of the os installed on my target?

Thanks in advance
Rüdiger Loos

"Alex Chapiro" <achapiro@qnx.com> schrieb im Newsbeitrag
news:bh8ic0$ck9$1@inn.qnx.com...
Things keep getting to be more and more weird.:-))). I
guess
before
continuing of this issue investigation it is a good
time
to
ask
you
which
version are you using on your host and on your target?
Host
build
version
you can find in about dialog. As far as I remember, we
never
shipped
6.2.1A.
This is important to know in order to look at correct
code.

Alex Chapiro


"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bh7mhp$mpr$1@inn.qnx.com...
I have no problem transfering the file from host to
target
using
file
system
navigator. Even larger files (10MB instead of 470kB)
can
be
transfered
without any problem.

"Alex Chapiro" <achapiro@qnx.com> schrieb im
Newsbeitrag
news:bh0edt$g2t$1@inn.qnx.com...
According to your log report, exception occurs
while
transferring
file
from
host to target. Exception message is just an errno
description.
Could
you
please try to copy the same file from host to /tmp
on
target,
using
File
System Navigator?

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote in
message
news:bh0cdg$el9$1@inn.qnx.com...
Hi Alex,

yes I've linked /tmp to /dev/shmem. But the
space
used
does
not
exceed
128kB.

Rüdiger

"Alex Chapiro" <achapiro@qnx.com> schrieb im
Newsbeitrag
news:bh0bkt$e1p$1@inn.qnx.com...
Do you have /tmp linked to /dev/shmem? If so,
how
much
space
it
uses
currently? It can easily exhaust your target
memory.

Alex Chapiro

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de> wrote
in
message
news:bgvo77$9m$1@inn.qnx.com...
No Mikhail, it does not.
This happens with every single application
trying
to
debug.
I have 128MB RAM on my target and I can't
debug
a
"hello
world"
program
:-(

Rüdiger

"Mikhail Khodjaiants" <mikhailk@qnx.com
schrieb
im
Newsbeitrag
news:bgtqdo$je3$1@nntp.qnx.com...
It seems that your target is running out
of
memory.

Mikhail

"Rüdiger Loos" <Ruediger.Loos@3SOFT.de
wrote
in
message
news:bgt56j$3o5$1@inn.qnx.com...
Hallo David,

I think the important entries are:

--------------------------
!ENTRY org.eclipse.debug.ui 4 120 Jun
17,
2003
12:47:13.220
!MESSAGE Error logged from Debug UI:
!STACK 1

org.eclipse.core.runtime.CoreException[503]:
java.io.IOException:
Open
Not
enough memory
at


















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at


















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at


















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at


















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at


















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at


















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at


















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog

$10.run(LaunchConfigurationDialog.java:2299)
at


















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
!ENTRY com.qnx.tools.ide.qde.ui 4 503
Jun
17,
2003
12:47:13.220
!MESSAGE Can't transfer file for etx :
Open
Not
enough
memory
!STACK 0
java.io.IOException: Open Not enough
memory
at


















com.qnx.tools.utils.target.TargetServiceFile.connect(TargetServiceFile.java:
347)
at


















com.qnx.tools.utils.target.TargetServiceFile.creat(TargetServiceFile.java:24
3)
at


















com.qnx.tools.utils.target.TargetFileDownload.download(TargetFileDownload.ja
va:54)
at


















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.perform

FileTransfer(LaunchConfigurationDelegate.java:443)
at


















com.qnx.tools.ide.qde.internal.ui.launch.LaunchConfigurationDelegate.launch(
LaunchConfigurationDelegate.java:144)
at


















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at


















org.eclipse.debug.internal.ui.launchConfigurations.LaunchConfigurationDialog

$10.run(LaunchConfigurationDialog.java:2299)
at


















org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext
.java:98)
-------

and

-------
!ENTRY org.eclipse.debug.ui 4 120 Apr
07,
2003
15:13:49.875
!MESSAGE Error logged from Debug UI:
!STACK 1

org.eclipse.core.runtime.CoreException[150]:
java.io.IOException:
Exec
error:Launching failed
at

org.eclipse.cdt.utils.spawner.Spawner.exec(Spawner.java:215)
at

org.eclipse.cdt.utils.spawner.Spawner.<init>(Spawner.java:48)
at









org.eclipse.cdt.utils.spawner.ProcessFactory.exec(ProcessFactory.java:70)
at


















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.exec(Local
CLaunchConfigurationDelegate.java:213)
at


















org.eclipse.cdt.launch.internal.LocalCLaunchConfigurationDelegate.launch(Loc
alCLaunchConfigurationDelegate.java:138)
at


















org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfigurati
on.java:136)
at


















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:56)
at


















org.eclipse.debug.internal.ui.actions.RelaunchActionDelegate.relaunch(Relaun
chActionDelegate.java:32)
at


















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction$1.run(Rela
unchHistoryLaunchAction.java:59)
at




org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66)
at


















org.eclipse.debug.internal.ui.actions.RelaunchHistoryLaunchAction.run(Relaun
chHistoryLaunchAction.java:57)
at

org.eclipse.jface.action.Action.runWithEvent(Action.java:749)
at


















org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(Action
ContributionItem.java:407)
at


















org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionCont
ributionItem.java:361)
at


















org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionI
tem.java:352)
at


















org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(A
ctionContributionItem.java:47)
at

org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:77)
at

org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:827)
at



org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:1529)
at


org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1291)
at



org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1343)
at

org.eclipse.ui.internal.Workbench.run(Workbench.java:1326)
at


















org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.jav
a:831)
at

org.eclipse.core.boot.BootLoader.run(BootLoader.java:462)
at
java.lang.reflect.Method.invoke(Native
Method)
at
org.eclipse.core.launcher.Main.basicRun(Main.java:247)
at
org.eclipse.core.launcher.Main.run(Main.java:703)
at
org.eclipse.core.launcher.Main.main(Main.java:539)
-----

My momentics is running on a Windows XP
PC
an
connected
via
Ethernet
with
my
X86 target.

The type of project is a "QNX C
Application
Project".

Regards

Rüdiger

P.S. I've heard of a patchB for
Momentics
6.2.1
that
should
solve
the
problem?!?


"David Gibbs" <dagibbs@qnx.com> schrieb
im
Newsbeitrag
news:bgrblu$j0n$2@nntp.qnx.com...
"Ruediger Loos"
Ruediger.Loos@3soft.de
wrote:
Hallo,

I have a big problem in debugging my
QNX
application.
I build my apps without any error
and
warning.
But when I start to debug my apps, I
get
a
"Launch
Configuration
Error"
with
one of the following informations:
"Exception occured processing launch
configuration.
Reason:
Failed
Launching
CDI Debugger: Error initializing:
Exec
error:Launching
failed"
or
"Exception occured : Not enough
memory"

Can anybody help me.

There's probably a .log file generated
in
workspace/.metadata,
can
you
post the corresponding entry?

Also, what host are you running on?

Are you out of/low on system memory?

What type of project is it? (QNX
C/C++?
Standard
Make?)

-David
--
QNX Training Services
http://www.qnx.com/support/training/
Please followup in this newsgroup if
you
have
further
questions.






































Alex Chapiro

Re: Debugging problems in 6.2.1a

Post by Alex Chapiro » Thu Aug 14, 2003 3:00 pm

Could you please provide more details about your problem?

"Jack Rosenbloom" <jrosenbloom@vertisinc.com> wrote in message
news:3F3B7A8E.4070103@vertisinc.com...
for all this talk about patch B solving problems, I have been unable to
debug any program with it. Constant errors opening temp directory.
This occurs on 2 different win2K development systems and two different
qnx targets. I find the bugs in 6.2.1a easier to deal with so I rolled
back and reported the mess to QNX waiting for them to get their act
together.

I have been an QNX4 user for a long time. Am I the only one who feels
that QNX has lost their ability to create quality SW?

Jack

Bill Caroselli wrote:
Is this patch B available to an evaluation copy of PE?
I have to admit, for the amount of extra cost of PE over SE,
so far I am NOT impressed!


Alex Chapiro <achapiro@qnx.com> wrote:
AC > It seems to be another problem that has been fixed at the early
stage of
AC > Patch B beta program.

AC > Alex Chapiro.


AC > "Bill Caroselli" <qtps@earthlink.net> wrote in message
AC > news:bhb7qd$bvn$1@inn.qnx.com...

"Rdiger Loos <Ruediger.Loos@3soft.de> wrote:
RdL > Hallo,

RdL > I have a big problem in debugging my QNX application.
RdL > I build my apps without any error and warning.
RdL > But when I start to debug my apps, I get a "Launch Configuration

AC > Error" with

RdL > one of the following informations:
RdL > "Exception occured processing launch configuration. Reason:
Failed

AC > Launching

RdL > CDI Debugger: Error initializing: Exec error:Launching failed" or
RdL > "Exception occured : Not enough memory"

I have a similar problem. I'm running 6.2.1A PE (Evaluation)

I am trying the debug the sample "Hello World" program that the IDE
creates when you select create a new "QNX C Application Project".

I built it without errors.

I created a new Launch Configuration and selected the debug version of
the executable and said to debug the program. I expected it to stop
at main().

Instead I got a pop up dialog that says: "Exception occured while
launching configuration. See log for more information. Reason: Failed
launching CDI Debugger : Not supported - this should not ever be
called."

The .metadata/.log file follows:
!SESSION Aug 12, 2003

AC > 12:21:13.478 ---------------------------------------------

java.version=1.3.0 subset
java.vendor=IBM Corporation
BootLoader constants: OS=qnx, ARCH=x86, WS=photon, NL=en_US
Command-line arguments: -os qnx -ws photon -arch x86 -data

AC > /root/workspace -install file:/usr/qde/eclipse/

!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.480
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.485
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.ui 4 0 Aug 12, 2003 12:21:13.585
!MESSAGE AbstractMarkerAnnotationModel.connected
!ENTRY org.eclipse.core.resources 4 368 Aug 12, 2003 12:21:13.589
!MESSAGE Resource /howdy/common.mk does not exist.
!ENTRY org.eclipse.debug.ui 4 120 Aug 12, 2003 12:24:56.454
!MESSAGE Error logged from Debug UI:
!STACK 1
org.eclipse.core.runtime.CoreException[150]:

AC > org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this
should not
AC > ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V

org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V


AC
com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
AC
org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
AC > e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;

AC
org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
AC
g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
AC > ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V

AC
org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
AC
;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
AC > ;

AC
org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
AC > $10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V

org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V

!ENTRY org.eclipse.cdt.launch 4 150 Aug 12, 2003 12:24:56.457
!MESSAGE Failed Launching CDI Debugger : Not Supported - this should
not

AC > ever be called!

!STACK 0
org.eclipse.cdt.debug.core.cdi.CDIException: Not Supported - this
should

AC > not ever be called!

Stack trace:
java/lang/Throwable.<init>()V
java/lang/Throwable.<init>(Ljava/lang/String;)V

org/eclipse/cdt/debug/core/cdi/CDIException.<init>(Ljava/lang/String;)V


AC
com/qnx/tools/ide/qde/debug/internal/core/CGDBDebugger.createLaunchSession(L
AC
org/eclipse/debug/core/ILaunchConfiguration;Lorg/eclipse/core/resources/IFil
AC > e;)Lorg/eclipse/cdt/debug/core/cdi/ICDISession;

AC
org/eclipse/cdt/launch/internal/LocalCLaunchConfigurationDelegate.launch(Lor
AC
g/eclipse/debug/core/ILaunchConfiguration;Ljava/lang/String;Lorg/eclipse/deb
AC > ug/core/ILaunch;Lorg/eclipse/core/runtime/IProgressMonitor;)V

AC
org/eclipse/debug/internal/core/LaunchConfiguration.launch(Ljava/lang/String
AC
;Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/debug/core/ILaunch
AC > ;

AC
org/eclipse/debug/internal/ui/launchConfigurations/LaunchConfigurationDialog
AC > $10.run(Lorg/eclipse/core/runtime/IProgressMonitor;)V

org/eclipse/jface/operation/ModalContext$ModalContextThread.run()V





Post Reply

Return to “qdn.public.devtools”